APRS Track Direct

My position About ☰

reset

SK4KO-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SK4KO-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Press*	Temp.in*	QNH*	Temp.out*
1758216958	982.4 hPa	23.4 C deg	1007.5 hPa	0 C deg
1758215158	982.2 hPa	23.5 C deg	1007.4 hPa	0 C deg
1758213358	982.2 hPa	23.7 C deg	1007.4 hPa	0 C deg
1758211558	982.5 hPa	24 C deg	1007.6 hPa	0 C deg
1758207958	982.3 hPa	23.8 C deg	1007.5 hPa	0 C deg
1758204357	983.6 hPa	23 C deg	1008.9 hPa	0 C deg
1758202557	983.7 hPa	22.8 C deg	1008.9 hPa	0 C deg
1758200757	984 hPa	22.7 C deg	1009.3 hPa	0 C deg
1758198957	984.5 hPa	22.8 C deg	1009.8 hPa	0 C deg
1758195357	985.1 hPa	22.9 C deg	1010.4 hPa	0 C deg
1758193557	985.5 hPa	22.8 C deg	1010.8 hPa	0 C deg
1758191757	985.6 hPa	22.9 C deg	1010.9 hPa	0 C deg
1758189957	985.7 hPa	22.8 C deg	1011 hPa	0 C deg
1758188156	986 hPa	22.8 C deg	1011.4 hPa	0 C deg
1758186356	986.2 hPa	23 C deg	1011.6 hPa	0 C deg
1758184556	986.7 hPa	22.9 C deg	1012 hPa	0 C deg
1758182756	986.7 hPa	23 C deg	1012 hPa	0 C deg
1758180956	986.8 hPa	23.1 C deg	1012.2 hPa	0 C deg
1758177356	986.8 hPa	23.3 C deg	1012.1 hPa	0 C deg
1758175556	987 hPa	23.5 C deg	1012.3 hPa	0 C deg
1758173756	987.1 hPa	23.4 C deg	1012.4 hPa	0 C deg

*Used Equation Coefficients:

Press: 0, 1, 0

Temp.in: 0, 1, 0

Hum: 0, 1, 0

QNH: 0, 1, 0

Temp.out: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)