This is the latest recevied telemetry packets stored in our database for station/object OH2EKK-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | WM* | YK* | AK* | OUT MIINUS* | OUT PLUS* |
|---|---|---|---|---|---|
| 1774122109 | 10.5 C | 9 C | 12 C | -122.5 C | 5.5 C |
| 1774120351 | 10.5 C | 9 C | 12 C | -123 C | 5 C |
| 1774118594 | 10.5 C | 9 C | 12 C | -122.5 C | 5.5 C |
| 1774116835 | 10.5 C | 9 C | 12 C | -122 C | 6 C |
| 1774111562 | 10.5 C | 9 C | 12 C | -122 C | 6 C |
| 1774108046 | 10.5 C | 9 C | 12 C | -120.5 C | 7.5 C |
| 1774106288 | 10.5 C | 9 C | 12 C | -121 C | 7 C |
| 1774104531 | 10.5 C | 9 C | 12 C | -120.5 C | 7.5 C |
| 1774102773 | 10.5 C | 9 C | 12 C | -120.5 C | 7.5 C |
| 1774101014 | 10.5 C | 9 C | 12 C | -120 C | 8 C |
| 1774099257 | 10.5 C | 9 C | 12 C | -120.5 C | 7.5 C |
| 1774097499 | 10.5 C | 9 C | 12 C | -119.5 C | 8.5 C |
| 1774095741 | 10.5 C | 8.5 C | 12 C | -119 C | 9 C |
| 1774093984 | 10.5 C | 8.5 C | 12 C | -120 C | 8 C |
| 1774092225 | 10.5 C | 8.5 C | 12 C | -121 C | 7 C |
| 1774088710 | 10.5 C | 8.5 C | 12 C | -121.5 C | 6.5 C |
| 1774086952 | 10.5 C | 8.5 C | 11.5 C | -121.5 C | 6.5 C |
| 1774085194 | 10.5 C | 8.5 C | 11.5 C | -122.5 C | 5.5 C |
| 1774083436 | 10.5 C | 8.5 C | 11.5 C | -123.5 C | 4.5 C |
| 1774081679 | 10.5 C | 8.5 C | 11.5 C | -124 C | 4 C |
| 1774079921 | 10.5 C | 8.5 C | 11.5 C | -125 C | 0 C |
| 1774078162 | 10.5 C | 8.5 C | 11.5 C | -125 C | 0 C |
| 1774076405 | 10.5 C | 8.5 C | 11 C | -125 C | 0 C |
| 1774074647 | 10.5 C | 8.5 C | 11 C | -125.5 C | 0 C |
| 1774072889 | 10.5 C | 8.5 C | 11 C | -126 C | 0 C |
*Used Equation Coefficients:
WM: 0, 0.5, 0
YK: 0, 0.5, 0
AK: 0, 0.5, 0
OUT MIINUS: 0, 0.5, -128
OUT PLUS: 0, 0.5, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)