APRS Track Direct

My position About ☰

reset

OE3XXI Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3XXI. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	UAkku*	TAkku*	VHeiz*	eff1H*
1790651546	13.35 Volt	23 Grad C	23 Grad C	96 %
1790650946	13.35 Volt	23 Grad C	23 Grad C	97 %
1790650346	13.35 Volt	23 Grad C	23 Grad C	97 %
1790649746	13.35 Volt	23 Grad C	23 Grad C	97 %
1790649146	13.35 Volt	23 Grad C	23 Grad C	97 %
1790648546	13.35 Volt	23 Grad C	23 Grad C	97 %
1790647946	13.35 Volt	23 Grad C	23 Grad C	96 %
1790647347	13.35 Volt	23 Grad C	23 Grad C	97 %
1790646746	13.35 Volt	23 Grad C	23 Grad C	96 %
1790646148	13.35 Volt	23 Grad C	23 Grad C	96 %
1790645546	13.35 Volt	23 Grad C	23 Grad C	97 %
1790644946	13.35 Volt	23 Grad C	23 Grad C	97 %
1790644346	13.35 Volt	23 Grad C	23 Grad C	98 %
1790643746	13.35 Volt	23 Grad C	23 Grad C	98 %
1790643147	13.35 Volt	23 Grad C	23 Grad C	98 %
1790642547	13.35 Volt	23 Grad C	23 Grad C	98 %
1790641946	13.35 Volt	23 Grad C	23 Grad C	98 %
1790641347	13.35 Volt	23 Grad C	23 Grad C	98 %
1790640747	13.35 Volt	23 Grad C	23.5 Grad C	98 %
1790640147	13.35 Volt	23 Grad C	23.5 Grad C	98 %
1790639547	13.35 Volt	23 Grad C	23.5 Grad C	98 %
1790638947	13.35 Volt	23 Grad C	23.5 Grad C	96 %
1790638347	13.35 Volt	23.5 Grad C	23.5 Grad C	96 %
1790637747	13.35 Volt	23.5 Grad C	23.5 Grad C	96 %
1790637147	13.35 Volt	23.5 Grad C	23.5 Grad C	97 %

*Used Equation Coefficients:

UAkku: 0, 0.075, 0

TAkku: 0, 0.5, -64

ISolar: 0, 0.061, 0

VHeiz: 0, 0.5, -64

eff1H: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)