This is the latest recevied telemetry packets stored in our database for station/object YC0TBU-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Satellite* | HDOP* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1792247938 | 6 | 1 | 0 | 0 | 0 |
| 1792247038 | 6 | 2 | 0 | 0 | 0 |
| 1792246138 | 6 | 2 | 0 | 0 | 0 |
| 1792245238 | 6 | 2 | 0 | 0 | 0 |
| 1792244338 | 6 | 1 | 0 | 0 | 0 |
| 1792243438 | 6 | 1 | 0 | 0 | 0 |
| 1792242538 | 6 | 1 | 0 | 0 | 0 |
| 1792241638 | 5 | 1 | 0 | 0 | 0 |
| 1792240737 | 7 | 1 | 0 | 0 | 0 |
| 1792239838 | 4 | 2 | 0 | 0 | 0 |
| 1792239827 | 4 | 2 | 0 | 0 | 0 |
| 1792238922 | 5 | 1 | 0 | 0 | 0 |
| 1792238022 | 5 | 2 | 0 | 0 | 0 |
| 1792237122 | 6 | 1 | 0 | 0 | 0 |
| 1792236222 | 6 | 1 | 0 | 0 | 0 |
| 1792235321 | 7 | 3 | 0 | 0 | 0 |
| 1792234421 | 7 | 1 | 0 | 0 | 0 |
| 1792233521 | 5 | 9 | 0 | 0 | 0 |
| 1792232621 | 6 | 1 | 0 | 0 | 0 |
| 1792231721 | 7 | 1 | 0 | 0 | 0 |
| 1792230821 | 9 | 1 | 0 | 0 | 0 |
| 1792229921 | 8 | 1 | 0 | 0 | 0 |
| 1792229021 | 7 | 1 | 0 | 0 | 0 |
| 1792228121 | 5 | 1 | 0 | 0 | 0 |
| 1792227221 | 7 | 1 | 0 | 0 | 0 |
*Used Equation Coefficients:
Satellite: 0, 1, 0
HDOP: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)