APRS Track Direct

My position About ☰

reset

OE3BUB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3BUB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Solar 2*	Temp In*	Rx1h*	Eff1h*
1786740427	13.8 Volt	27 C	570 Pkt	96 Pcnt
1786740127	13.8 Volt	27 C	570 Pkt	96 Pcnt
1786739827	13.8 Volt	27 C	560 Pkt	96 Pcnt
1786739527	13.8 Volt	27.5 C	550 Pkt	96 Pcnt
1786739227	13.8 Volt	27 C	540 Pkt	96 Pcnt
1786738927	13.8 Volt	27.5 C	540 Pkt	96 Pcnt
1786738627	13.8 Volt	28 C	540 Pkt	97 Pcnt
1786738327	13.8 Volt	28.5 C	530 Pkt	96 Pcnt
1786738027	13.8 Volt	28.5 C	510 Pkt	96 Pcnt
1786737727	13.8 Volt	28.5 C	540 Pkt	97 Pcnt
1786737427	13.8 Volt	28.5 C	540 Pkt	96 Pcnt
1786737127	13.8 Volt	28.5 C	540 Pkt	96 Pcnt
1786736827	13.8 Volt	28.5 C	550 Pkt	97 Pcnt
1786736527	13.8 Volt	28.5 C	540 Pkt	96 Pcnt
1786736227	13.8 Volt	28.5 C	530 Pkt	95 Pcnt
1786735927	13.8 Volt	28.5 C	540 Pkt	95 Pcnt
1786735628	13.8 Volt	28.5 C	540 Pkt	95 Pcnt
1786735327	13.8 Volt	28.5 C	560 Pkt	95 Pcnt
1786735028	13.8 Volt	28.5 C	550 Pkt	94 Pcnt
1786734728	13.8 Volt	28.5 C	560 Pkt	94 Pcnt
1786734427	13.8 Volt	28.5 C	550 Pkt	94 Pcnt
1786734128	13.8 Volt	28.5 C	540 Pkt	94 Pcnt
1786733827	13.8 Volt	28.5 C	560 Pkt	94 Pcnt
1786733528	13.8 Volt	28.5 C	560 Pkt	94 Pcnt
1786733228	13.8 Volt	28.5 C	550 Pkt	93 Pcnt

*Used Equation Coefficients:

Solar 2: 0, 0.075, 0

Temp In: 0, 0.5, -64

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

AMD: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)