APRS Track Direct

My position About ☰

reset

9A4OS-12 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9A4OS-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1753687845	14.1 Volt	530 Pkt	130 Pkt	82 Pcnt
1753686645	14.1 Volt	570 Pkt	130 Pkt	84 Pcnt
1753685443	14.1 Volt	600 Pkt	110 Pkt	82 Pcnt
1753684243	14.1 Volt	550 Pkt	90 Pkt	80 Pcnt
1753683042	14.1 Volt	530 Pkt	90 Pkt	77 Pcnt
1753681841	14.1 Volt	460 Pkt	90 Pkt	77 Pcnt
1753680638	14.1 Volt	400 Pkt	80 Pkt	75 Pcnt
1753679439	14.1 Volt	380 Pkt	80 Pkt	77 Pcnt
1753678237	14.1 Volt	360 Pkt	70 Pkt	78 Pcnt
1753677037	14.1 Volt	380 Pkt	80 Pkt	82 Pcnt
1753675835	14.1 Volt	370 Pkt	70 Pkt	79 Pcnt
1753674637	14.1 Volt	370 Pkt	80 Pkt	81 Pcnt
1753673433	14.1 Volt	370 Pkt	70 Pkt	82 Pcnt
1753671030	14.1 Volt	380 Pkt	80 Pkt	82 Pcnt
1753669828	14.1 Volt	380 Pkt	80 Pkt	81 Pcnt
1753668628	14.1 Volt	400 Pkt	90 Pkt	82 Pcnt
1753667426	14.1 Volt	410 Pkt	90 Pkt	83 Pcnt
1753666225	14.1 Volt	400 Pkt	90 Pkt	79 Pcnt
1753665027	14.1 Volt	390 Pkt	80 Pkt	78 Pcnt
1753663823	14.1 Volt	380 Pkt	80 Pkt	74 Pcnt
1753662621	14.1 Volt	390 Pkt	70 Pkt	76 Pcnt
1753661421	14.1 Volt	390 Pkt	70 Pkt	76 Pcnt
1753660220	14.1 Volt	450 Pkt	70 Pkt	77 Pcnt
1753659019	14.1 Volt	480 Pkt	70 Pkt	77 Pcnt
1753657817	14.1 Volt	510 Pkt	80 Pkt	78 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

A5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)