APRS Track Direct

My position About ☰

reset

TB2DSF-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB2DSF-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1753812894	181 Pkt	2 Pkt	75 Pkt	-53 dBm	12.12 V
1753811951	181 Pkt	3 Pkt	81 Pkt	-52 dBm	12.12 V
1753811002	177 Pkt	9 Pkt	78 Pkt	-50 dBm	12.14 V
1753810054	12 Pkt	2 Pkt	12 Pkt	-52 dBm	12.12 V
1753809324	172 Pkt	4 Pkt	91 Pkt	-54 dBm	12.14 V
1753808377	158 Pkt	7 Pkt	107 Pkt	-52 dBm	12.14 V
1753807427	197 Pkt	1 Pkt	91 Pkt	-57 dBm	12.12 V
1753806481	9 Pkt	2 Pkt	10 Pkt	-55 dBm	12.12 V
1753805982	167 Pkt	1 Pkt	92 Pkt	-54 dBm	12.14 V
1753805038	20 Pkt	0 Pkt	8 Pkt	-54 dBm	12.12 V
1753804736	160 Pkt	3 Pkt	75 Pkt	-56 dBm	12.12 V
1753803791	163 Pkt	1 Pkt	106 Pkt	-56 dBm	12.12 V
1753802847	172 Pkt	3 Pkt	99 Pkt	-57 dBm	12.14 V
1753801905	16 Pkt	1 Pkt	8 Pkt	-55 dBm	12.12 V
1753801079	185 Pkt	3 Pkt	97 Pkt	-55 dBm	12.14 V
1753800128	187 Pkt	6 Pkt	77 Pkt	-55 dBm	12.12 V
1753799177	189 Pkt	2 Pkt	91 Pkt	-57 dBm	12.14 V
1753798229	186 Pkt	3 Pkt	75 Pkt	-55 dBm	12.12 V
1753797284	12 Pkt	0 Pkt	11 Pkt	-50 dBm	12.12 V
1753796689	218 Pkt	1 Pkt	72 Pkt	-55 dBm	12.14 V
1753795739	211 Pkt	4 Pkt	96 Pkt	-61 dBm	12.12 V
1753794790	204 Pkt	8 Pkt	78 Pkt	-61 dBm	12.12 V
1753793838	164 Pkt	5 Pkt	82 Pkt	-60 dBm	12.12 V
1753792889	184 Pkt	9 Pkt	73 Pkt	-59 dBm	12.12 V
1753791933	158 Pkt	1 Pkt	85 Pkt	-61 dBm	12.12 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)