APRS Track Direct

My position About ☰

reset

VK3RAW-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object VK3RAW-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	Temp*	Battery*	TX*	Value4*	Value5*
1786733679	10.5 Deg.C	12 Volts	46 PTT's	17	37
1786731880	10.5 Deg.C	12 Volts	40 PTT's	17	7
1786730082	10.5 Deg.C	12 Volts	51 PTT's	16	37
1786728281	10.5 Deg.C	12 Volts	55 PTT's	16	7
1786726478	10.5 Deg.C	12 Volts	62 PTT's	15	37
1786724680	10.5 Deg.C	12 Volts	56 PTT's	15	7
1786724680	10.5 Deg.C	12 Volts	56 PTT's	15	7
1786722880	11 Deg.C	12 Volts	56 PTT's	14	37
1786717482	11.5 Deg.C	12 Volts	60 PTT's	13	7
1786715679	11.5 Deg.C	12 Volts	57 PTT's	12	37
1786713879	11.5 Deg.C	12 Volts	50 PTT's	12	7
1786712079	12 Deg.C	11.9 Volts	61 PTT's	11	37
1786710278	12.5 Deg.C	12 Volts	54 PTT's	11	7
1786708480	12.5 Deg.C	12 Volts	46 PTT's	10	37
1786706678	13 Deg.C	12 Volts	55 PTT's	10	7
1786704879	13.5 Deg.C	12 Volts	56 PTT's	9	37
1786703079	14 Deg.C	12 Volts	48 PTT's	9	7
1786701279	15 Deg.C	12 Volts	60 PTT's	8	37
1786699480	15.5 Deg.C	12 Volts	69 PTT's	8	7
1786697680	16.5 Deg.C	12 Volts	46 PTT's	7	37
1786694079	19.5 Deg.C	12 Volts	53 PTT's	6	37
1786690479	21.5 Deg.C	12.1 Volts	58 PTT's	5	37
1786688679	22 Deg.C	12 Volts	54 PTT's	5	7
1786686879	22 Deg.C	12.1 Volts	51 PTT's	4	37
1786685079	21.5 Deg.C	12.1 Volts	44 PTT's	4	7

*Used Equation Coefficients:

Temp: 0, 0.5, 0

Battery: 0, 0.1, 0

TX: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)