This is the latest recevied telemetry packets stored in our database for station/object DL4AXL-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Temp* | Humi* | Baro* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1754125290 | 20.9 deg C | 57.7 % | 1012.6 hPa | 0 | 0 |
| 1754124390 | 21 deg C | 58 % | 1013.1 hPa | 0 | 0 |
| 1754123490 | 21.1 deg C | 58.8 % | 1012.6 hPa | 0 | 0 |
| 1754122590 | 21.1 deg C | 59 % | 1012.4 hPa | 0 | 0 |
| 1754121690 | 21 deg C | 58.9 % | 1013.7 hPa | 0 | 0 |
| 1754120790 | 21 deg C | 59 % | 1011.9 hPa | 0 | 0 |
| 1754119890 | 20.9 deg C | 59.1 % | 1012.8 hPa | 0 | 0 |
| 1754118989 | 20.9 deg C | 59 % | 1013.2 hPa | 0 | 0 |
| 1754118089 | 20.8 deg C | 59 % | 1012.3 hPa | 0 | 0 |
| 1754117189 | 20.5 deg C | 59.3 % | 1011.6 hPa | 0 | 0 |
| 1754116289 | 20.7 deg C | 58.9 % | 1011.5 hPa | 0 | 0 |
| 1754115389 | 20.7 deg C | 59 % | 1012.4 hPa | 0 | 0 |
| 1754114489 | 20.6 deg C | 59 % | 1011.2 hPa | 0 | 0 |
| 1754113589 | 20.7 deg C | 59.1 % | 1011.1 hPa | 0 | 0 |
| 1754112696 | 20.7 deg C | 59 % | 1012.5 hPa | 0 | 0 |
| 1754111789 | 20.7 deg C | 59.1 % | 1011.3 hPa | 0 | 0 |
| 1754110889 | 20.7 deg C | 59 % | 1011.6 hPa | 0 | 0 |
| 1754109989 | 20.7 deg C | 59.1 % | 1012.1 hPa | 0 | 0 |
| 1754109089 | 20.7 deg C | 59 % | 1012.2 hPa | 0 | 0 |
| 1754108189 | 20.8 deg C | 59.1 % | 1012.7 hPa | 0 | 0 |
| 1754107289 | 20.8 deg C | 59 % | 1012 hPa | 0 | 0 |
| 1754106389 | 20.8 deg C | 59.1 % | 1010.7 hPa | 0 | 0 |
| 1754105488 | 20.8 deg C | 59.1 % | 1012.4 hPa | 0 | 0 |
| 1754104588 | 20.9 deg C | 59.2 % | 1011.6 hPa | 0 | 0 |
| 1754103688 | 20.9 deg C | 59.2 % | 1012.7 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)