APRS Track Direct

My position About ☰

reset

KK4LYY-0 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object KK4LYY-0. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RFIn*	RFiGate*	DigiRpt*	Temp*
1753563518	41 Pkts	40 Pkts	19 Pkts	21 C
1753559917	34 Pkts	33 Pkts	5 Pkts	20 C
1753556317	33 Pkts	33 Pkts	11 Pkts	22 C
1753552717	41 Pkts	40 Pkts	18 Pkts	22 C
1753549118	45 Pkts	44 Pkts	21 Pkts	21 C
1753533211	41 Pkts	41 Pkts	8 Pkts	21 C
1753529611	45 Pkts	45 Pkts	9 Pkts	20 C
1753526011	58 Pkts	58 Pkts	7 Pkts	20 C
1753522411	42 Pkts	42 Pkts	7 Pkts	20 C
1753518811	41 Pkts	41 Pkts	9 Pkts	20 C
1753515211	29 Pkts	29 Pkts	8 Pkts	20 C
1753511611	39 Pkts	39 Pkts	8 Pkts	20 C
1753508011	75 Pkts	75 Pkts	14 Pkts	20 C
1753504411	45 Pkts	44 Pkts	9 Pkts	20 C
1753500812	23 Pkts	23 Pkts	4 Pkts	20 C
1753497212	18 Pkts	18 Pkts	3 Pkts	20 C
1753493612	30 Pkts	30 Pkts	5 Pkts	20 C
1753490011	7 Pkts	7 Pkts	1 Pkts	20 C
1753486411	2 Pkts	2 Pkts	1 Pkts	20 C
1753482811	8 Pkts	8 Pkts	4 Pkts	20 C

*Used Equation Coefficients:

RFIn: 0, 1, 0

RFiGate: 0, 1, 0

DigiRpt: 0, 1, 0

Temp: 0, 1, 0

InetiGate: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)