This is the latest recevied telemetry packets stored in our database for station/object GM4HYG-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | TX* | RX* | Digi* | V_Bat* | V_Ext* |
|---|---|---|---|---|---|
| 1792247908 | 0 Count | 568 Count | 0 Count | 0 VDC | 0 VDC |
| 1792247008 | 0 Count | 566 Count | 0 Count | 0 VDC | 0 VDC |
| 1792246108 | 0 Count | 565 Count | 0 Count | 0 VDC | 0 VDC |
| 1792245208 | 0 Count | 564 Count | 0 Count | 0 VDC | 0 VDC |
| 1792244308 | 0 Count | 562 Count | 0 Count | 0 VDC | 0 VDC |
| 1792243408 | 0 Count | 561 Count | 0 Count | 0 VDC | 0 VDC |
| 1792242508 | 0 Count | 560 Count | 0 Count | 0 VDC | 0 VDC |
| 1792241608 | 0 Count | 557 Count | 0 Count | 0 VDC | 0 VDC |
| 1792240707 | 0 Count | 554 Count | 0 Count | 0 VDC | 0 VDC |
| 1792239807 | 0 Count | 542 Count | 0 Count | 0 VDC | 0 VDC |
| 1792238907 | 0 Count | 525 Count | 0 Count | 0 VDC | 0 VDC |
| 1792238007 | 0 Count | 484 Count | 0 Count | 0 VDC | 0 VDC |
| 1792237107 | 0 Count | 472 Count | 0 Count | 0 VDC | 0 VDC |
| 1792236207 | 0 Count | 471 Count | 0 Count | 0 VDC | 0 VDC |
| 1792235307 | 0 Count | 470 Count | 0 Count | 0 VDC | 0 VDC |
| 1792234407 | 0 Count | 469 Count | 0 Count | 0 VDC | 0 VDC |
| 1792233507 | 0 Count | 468 Count | 0 Count | 0 VDC | 0 VDC |
| 1792232607 | 0 Count | 467 Count | 0 Count | 0 VDC | 0 VDC |
| 1792231707 | 0 Count | 466 Count | 0 Count | 0 VDC | 0 VDC |
| 1792230807 | 0 Count | 465 Count | 0 Count | 0 VDC | 0 VDC |
*Used Equation Coefficients:
TX: 0, 1, 0
RX: 0, 1, 0
Digi: 0, 1, 0
V_Bat: 0, 0.01, 0
V_Ext: 0, 0.02, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)