APRS Track Direct

My position About ☰

reset

9M2WMW-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M2WMW-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1750101233	2 Pkt	3 Pkt	3 Pkt	-62 dBm	0.16 V
1750099408	4 Pkt	0 Pkt	0 Pkt	-61 dBm	0.16 V
1750097582	2 Pkt	0 Pkt	0 Pkt	-62 dBm	0.16 V
1750095757	3 Pkt	0 Pkt	0 Pkt	-60 dBm	0.16 V
1750093931	3 Pkt	0 Pkt	0 Pkt	-61 dBm	0.16 V
1750092105	6 Pkt	0 Pkt	0 Pkt	-61 dBm	0.16 V
1750090279	23 Pkt	0 Pkt	0 Pkt	-61 dBm	0.16 V
1750088450	15 Pkt	1 Pkt	1 Pkt	-61 dBm	0.16 V
1750086621	4 Pkt	5 Pkt	3 Pkt	-61 dBm	0.16 V
1750084794	4 Pkt	4 Pkt	5 Pkt	-62 dBm	0.16 V
1750082967	2 Pkt	16 Pkt	14 Pkt	-62 dBm	0.16 V
1750081140	3 Pkt	26 Pkt	6 Pkt	-62 dBm	0.16 V
1750079313	2 Pkt	11 Pkt	6 Pkt	-59 dBm	0.16 V
1750077487	13 Pkt	23 Pkt	20 Pkt	-64 dBm	0.16 V
1750075658	23 Pkt	34 Pkt	29 Pkt	-62 dBm	0.16 V
1750073827	17 Pkt	23 Pkt	21 Pkt	-60 dBm	0.16 V
1750071996	18 Pkt	35 Pkt	32 Pkt	-63 dBm	0.16 V
1750070163	10 Pkt	31 Pkt	22 Pkt	-64 dBm	0.16 V
1750068334	26 Pkt	26 Pkt	13 Pkt	-61 dBm	0.16 V
1750066504	16 Pkt	5 Pkt	3 Pkt	-61 dBm	0.16 V
1750064676	3 Pkt	0 Pkt	0 Pkt	-61 dBm	0.16 V
1750062851	2 Pkt	0 Pkt	0 Pkt	-62 dBm	0.16 V
1750061025	3 Pkt	0 Pkt	0 Pkt	-62 dBm	0.16 V
1750059200	5 Pkt	0 Pkt	0 Pkt	-60 dBm	0.16 V
1750057374	4 Pkt	0 Pkt	0 Pkt	-62 dBm	0.16 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)