This is the latest recevied telemetry packets stored in our database for station/object IZ5MMH-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274500 | -15 dbm | 3.03 V | 0 | 0 | 0 |
| 1836274350 | -16 dbm | 3.03 V | 0 | 0 | 0 |
| 1836273900 | -13 dbm | 3.03 V | 0 | 0 | 0 |
| 1762311260 | -14 dbm | 3.04 V | 0 | 0 | 0 |
| 1762310660 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762310060 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762309460 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762308860 | -12 dbm | 3.04 V | 0 | 0 | 0 |
| 1762308260 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762307661 | -14 dbm | 3.04 V | 0 | 0 | 0 |
| 1762307060 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762306460 | -15 dbm | 3.04 V | 0 | 0 | 0 |
| 1762305860 | -18 dbm | 3.04 V | 0 | 0 | 0 |
| 1762305260 | -15 dbm | 3.04 V | 0 | 0 | 0 |
| 1762304660 | -14 dbm | 3.04 V | 0 | 0 | 0 |
| 1762304060 | -14 dbm | 3.04 V | 0 | 0 | 0 |
| 1762303460 | -19 dbm | 3.04 V | 0 | 0 | 0 |
| 1762302860 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762302260 | -15 dbm | 3.04 V | 0 | 0 | 0 |
| 1762301660 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762301060 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762300468 | -15 dbm | 3.04 V | 0 | 0 | 0 |
| 1762299860 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762299260 | -13 dbm | 3.04 V | 0 | 0 | 0 |
| 1762298660 | -13 dbm | 3.04 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)