APRS Track Direct

My position About ☰

reset

W8AGT Telemetry

This is the latest recevied telemetry packets stored in our database for station/object W8AGT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1739739724	0.03 Rx Erlang	0.01 Tx Erlang	20 count/10m	0 count/10m	4 count/10m
1739738524	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	1 count/10m	6 count/10m
1739737324	0.02 Rx Erlang	0.01 Tx Erlang	17 count/10m	0 count/10m	6 count/10m
1739736124	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	7 count/10m
1739734924	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	2 count/10m	9 count/10m
1739733724	0.04 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	7 count/10m
1739732524	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	0 count/10m	9 count/10m
1739731324	0.03 Rx Erlang	0.01 Tx Erlang	26 count/10m	1 count/10m	9 count/10m
1739730124	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	0 count/10m	7 count/10m
1739728924	0.03 Rx Erlang	0.01 Tx Erlang	25 count/10m	1 count/10m	6 count/10m
1739727724	0.02 Rx Erlang	0.01 Tx Erlang	20 count/10m	2 count/10m	5 count/10m
1739726524	0.03 Rx Erlang	0.01 Tx Erlang	24 count/10m	1 count/10m	8 count/10m
1739725324	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	1 count/10m	6 count/10m
1739724124	0.03 Rx Erlang	0.01 Tx Erlang	29 count/10m	0 count/10m	9 count/10m
1739722924	0.03 Rx Erlang	0.01 Tx Erlang	28 count/10m	1 count/10m	9 count/10m
1739721724	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	7 count/10m
1739720524	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	0 count/10m	6 count/10m
1739719324	0.02 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	6 count/10m
1739718124	0.02 Rx Erlang	0.01 Tx Erlang	21 count/10m	1 count/10m	6 count/10m
1739716924	0.03 Rx Erlang	0.01 Tx Erlang	27 count/10m	1 count/10m	8 count/10m
1739715724	0.04 Rx Erlang	0.01 Tx Erlang	34 count/10m	0 count/10m	9 count/10m
1739714524	0.02 Rx Erlang	0.01 Tx Erlang	18 count/10m	0 count/10m	5 count/10m
1739713324	0.03 Rx Erlang	0.01 Tx Erlang	31 count/10m	1 count/10m	9 count/10m
1739712124	0.02 Rx Erlang	0 Tx Erlang	17 count/10m	0 count/10m	3 count/10m
1739710924	0.03 Rx Erlang	0.01 Tx Erlang	22 count/10m	0 count/10m	4 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)