APRS Track Direct

My position About ☰

reset

TA3GR-11 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA3GR-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274404	0 Pkt	0 Pkt	-44 dBm	13.17 V
1836274276	0 Pkt	0 Pkt	-44 dBm	13.17 V
1779910964	0 Pkt	12 Pkt	-43 dBm	13.17 V
1779910341	0 Pkt	16 Pkt	-42 dBm	13.15 V
1779909721	0 Pkt	7 Pkt	-39 dBm	13.17 V
1779909096	0 Pkt	11 Pkt	-42 dBm	13.17 V
1779908474	0 Pkt	1 Pkt	-41 dBm	13.17 V
1779907852	0 Pkt	3 Pkt	-41 dBm	13.17 V
1779907230	0 Pkt	6 Pkt	-43 dBm	13.17 V
1779906608	0 Pkt	1 Pkt	-44 dBm	13.17 V
1779905986	0 Pkt	1 Pkt	-44 dBm	13.15 V
1779905364	0 Pkt	0 Pkt	-42 dBm	13.15 V
1779904742	1 Pkt	2 Pkt	-48 dBm	13.17 V
1779904119	1 Pkt	1 Pkt	-43 dBm	13.15 V
1779903497	2 Pkt	1 Pkt	-41 dBm	13.17 V
1779902875	0 Pkt	1 Pkt	-39 dBm	13.17 V
1779902252	0 Pkt	4 Pkt	-43 dBm	13.17 V
1779901630	0 Pkt	1 Pkt	-39 dBm	13.17 V
1779901008	0 Pkt	0 Pkt	-43 dBm	13.17 V
1779900386	0 Pkt	2 Pkt	-43 dBm	13.15 V
1779899764	0 Pkt	6 Pkt	-42 dBm	13.17 V
1779899142	0 Pkt	0 Pkt	-43 dBm	13.17 V
1779898520	0 Pkt	15 Pkt	-43 dBm	13.15 V
1779897897	0 Pkt	28 Pkt	-44 dBm	13.17 V
1779897274	0 Pkt	14 Pkt	-43 dBm	12.86 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)