APRS Track Direct

My position About ☰

reset

WC4PEM-13 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object WC4PEM-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Vin*	Dg1h*	Rx1h*	Eff1h*
1790644953	25.5 C	14.25 Volt	160 Pkt	540 Pkt	63 Pcnt
1790644653	26 C	14.25 Volt	160 Pkt	530 Pkt	62 Pcnt
1790644353	26 C	14.25 Volt	170 Pkt	520 Pkt	61 Pcnt
1790644053	25.5 C	14.25 Volt	160 Pkt	490 Pkt	60 Pcnt
1790643753	26 C	14.25 Volt	160 Pkt	470 Pkt	59 Pcnt
1790643453	26.5 C	14.25 Volt	160 Pkt	470 Pkt	60 Pcnt
1790643153	25.5 C	14.25 Volt	160 Pkt	470 Pkt	59 Pcnt
1790642853	25.5 C	14.25 Volt	170 Pkt	460 Pkt	60 Pcnt
1790642553	26 C	14.25 Volt	180 Pkt	460 Pkt	59 Pcnt
1790642253	26 C	14.25 Volt	170 Pkt	450 Pkt	59 Pcnt
1790641953	25.5 C	14.25 Volt	180 Pkt	460 Pkt	60 Pcnt
1790641653	25.5 C	14.25 Volt	180 Pkt	460 Pkt	60 Pcnt
1790641353	26 C	14.25 Volt	180 Pkt	450 Pkt	60 Pcnt
1790641053	26 C	14.25 Volt	170 Pkt	440 Pkt	59 Pcnt
1790640753	25.5 C	14.25 Volt	170 Pkt	440 Pkt	59 Pcnt
1790640453	26 C	14.25 Volt	170 Pkt	430 Pkt	59 Pcnt
1790640154	26 C	14.25 Volt	170 Pkt	440 Pkt	58 Pcnt
1790640153	26 C	14.25 Volt	170 Pkt	440 Pkt	58 Pcnt
1790639853	25.5 C	14.25 Volt	180 Pkt	440 Pkt	59 Pcnt
1790639553	25.5 C	14.25 Volt	170 Pkt	440 Pkt	61 Pcnt
1790639253	26 C	14.25 Volt	160 Pkt	420 Pkt	61 Pcnt
1790638953	26 C	14.25 Volt	160 Pkt	420 Pkt	63 Pcnt
1790638653	25.5 C	14.18 Volt	160 Pkt	410 Pkt	64 Pcnt
1790638353	26 C	14.25 Volt	160 Pkt	400 Pkt	64 Pcnt
1790638053	26.5 C	14.18 Volt	150 Pkt	400 Pkt	65 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Vin: 0, 0.075, 0

Dg1h: 0, 10, 0

Rx1h: 0, 10, 0

Eff1h: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)