APRS Track Direct

My position About ☰

reset

TB8ATA-6 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TB8ATA-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RSSI*	Voltage*
1758221076	0 Pkt	-16 dBm	12.06 V
1758220454	3 Pkt	-16 dBm	12.02 V
1758219832	2 Pkt	-16 dBm	12.06 V
1758219210	1 Pkt	-16 dBm	12.06 V
1758218588	2 Pkt	-16 dBm	12.06 V
1758217966	2 Pkt	-15 dBm	12.06 V
1758217344	0 Pkt	-16 dBm	12.06 V
1758216722	2 Pkt	-16 dBm	12.06 V
1758216099	0 Pkt	-17 dBm	12.06 V
1758215477	2 Pkt	-16 dBm	11.92 V
1758214854	1 Pkt	-16 dBm	12.06 V
1758214231	2 Pkt	-16 dBm	12.06 V
1758213610	2 Pkt	-16 dBm	12.06 V
1758212987	2 Pkt	-16 dBm	12.02 V
1758212364	3 Pkt	-16 dBm	12.06 V
1758211742	0 Pkt	-16 dBm	12.06 V
1758211121	1 Pkt	-16 dBm	12.06 V
1758210498	1 Pkt	-16 dBm	12.02 V
1758209876	3 Pkt	-16 dBm	11.92 V
1758209253	2 Pkt	-16 dBm	12.02 V
1758208630	2 Pkt	-15 dBm	12.02 V
1758208008	2 Pkt	-15 dBm	12.02 V
1758207386	3 Pkt	-15 dBm	12.06 V
1758206762	0 Pkt	-16 dBm	12.06 V
1758206140	3 Pkt	-18 dBm	12.02 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)