This is the latest recevied telemetry packets stored in our database for station/object DL3HAH-7. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Press* | Temp.in* | Hum* | QNH* | Temp.out* |
|---|---|---|---|---|---|
| 1758189588 | 1011.1 hPa | 24.8 C deg | 48.8 % | 1025.5 hPa | 20.4 C deg |
| 1758187788 | 1011 hPa | 24.6 C deg | 49.1 % | 1025.5 hPa | 19.8 C deg |
| 1758185988 | 1010.9 hPa | 24.4 C deg | 49.4 % | 1025.4 hPa | 19 C deg |
| 1758184188 | 1010.6 hPa | 24.3 C deg | 49.8 % | 1025.1 hPa | 18.8 C deg |
| 1758182388 | 1010.3 hPa | 24.5 C deg | 49.3 % | 1024.7 hPa | 18.9 C deg |
| 1758180587 | 1010 hPa | 24.1 C deg | 48.8 % | 1024.4 hPa | 18.1 C deg |
| 1758178787 | 1009.7 hPa | 23.6 C deg | 49.7 % | 1024.2 hPa | 17.4 C deg |
| 1758176987 | 1009.5 hPa | 23.3 C deg | 50.3 % | 1024 hPa | 17.1 C deg |
| 1758175187 | 1009.3 hPa | 23.4 C deg | 50 % | 1023.8 hPa | 16.6 C deg |
| 1758173387 | 1009.2 hPa | 23.4 C deg | 49.6 % | 1023.7 hPa | 16.1 C deg |
| 1758171587 | 1009 hPa | 23.6 C deg | 48.5 % | 1023.5 hPa | 15.9 C deg |
| 1758137384 | 1008.2 hPa | 23.8 C deg | 47.2 % | 1022.7 hPa | 17.2 C deg |
| 1758135584 | 1008.3 hPa | 23.8 C deg | 47.3 % | 1022.8 hPa | 17.6 C deg |
*Used Equation Coefficients:
Press: 0, 1, 0
Temp.in: 0, 1, 0
Hum: 0, 1, 0
QNH: 0, 1, 0
Temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)