This is the latest recevied telemetry packets stored in our database for station/object YO9ABK-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1753770968 | 124.4 | 0 | 0 | 0 | 0 |
| 1753770368 | 124.4 | 0 | 0 | 0 | 0 |
| 1753769768 | 123.4 | 0 | 0 | 0 | 0 |
| 1753769168 | 123.8 | 0 | 0 | 0 | 0 |
| 1753768568 | 123.4 | 0 | 0 | 0 | 0 |
| 1753767968 | 123.1 | 0 | 0 | 0 | 0 |
| 1753767368 | 121.8 | 0 | 0 | 0 | 0 |
| 1753766768 | 121.2 | 0 | 0 | 0 | 0 |
| 1753766168 | 121.4 | 0 | 0 | 0 | 0 |
| 1753765568 | 121.8 | 0 | 0 | 0 | 0 |
| 1753764968 | 121.2 | 0 | 0 | 0 | 0 |
| 1753764369 | 120.8 | 0 | 0 | 0 | 0 |
| 1753763768 | 120.8 | 0 | 0 | 0 | 0 |
| 1753763168 | 120.9 | 0 | 0 | 0 | 0 |
| 1753762568 | 120.4 | 0 | 0 | 0 | 0 |
| 1753761968 | 120.5 | 0 | 0 | 0 | 0 |
| 1753761368 | 120.6 | 0 | 0 | 0 | 0 |
| 1753760768 | 120.8 | 0 | 0 | 0 | 0 |
| 1753760168 | 120.4 | 0 | 0 | 0 | 0 |
| 1753759568 | 120.1 | 0 | 0 | 0 | 0 |
| 1753758968 | 120.2 | 0 | 0 | 0 | 0 |
| 1753758368 | 120.5 | 0 | 0 | 0 | 0 |
| 1753757768 | 120.9 | 0 | 0 | 0 | 0 |
| 1753757168 | 120.4 | 0 | 0 | 0 | 0 |
| 1753756568 | 120.4 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)