This is the latest recevied telemetry packets stored in our database for station/object DF0OH-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Batt12V* | Batt48V* | I48V* | Umin* | Cell#* |
---|---|---|---|---|---|
1719658458 | 14.3 V | 53.65 V | -99.9 A | 2.03 V | 17 # |
1719657536 | 14.3 V | 53.44 V | -99.9 A | 2.03 V | 17 # |
1719656604 | 14.3 V | 52.75 V | -99.9 A | 2.03 V | 17 # |
1719655661 | 14.3 V | 52.16 V | -99.9 A | 2.03 V | 17 # |
1719654696 | 14.3 V | 52.27 V | -99.9 A | 2.03 V | 17 # |
1719653729 | 14.3 V | 51.3 V | -99.9 A | 2.03 V | 17 # |
1719652775 | 14.3 V | 49.96 V | -99.9 A | 2.03 V | 17 # |
1719651853 | 14.3 V | 49.64 V | -99.9 A | 2.03 V | 17 # |
1719650887 | 14.3 V | 49.32 V | -99.9 A | 2.03 V | 17 # |
1719649964 | 14.3 V | 49.08 V | -99.9 A | 2.03 V | 17 # |
1719649032 | 14.16 V | 48.6 V | -99.9 A | 2.03 V | 17 # |
1719648075 | 14.05 V | 48.48 V | -99.9 A | 2.03 V | 17 # |
1719647131 | 13.85 V | 48.22 V | -99.9 A | 2.03 V | 17 # |
1719646209 | 13.77 V | 48.07 V | -99.9 A | 2.03 V | 17 # |
1719645265 | 13.7 V | 47.99 V | -99.9 A | 2.03 V | 17 # |
1719644333 | 13.68 V | 47.97 V | -99.9 A | 2.03 V | 17 # |
1719643380 | 13.66 V | 47.92 V | -99.9 A | 2.03 V | 17 # |
1719642479 | 13.52 V | 47.83 V | -99.9 A | 2.03 V | 17 # |
1719641524 | 13.39 V | 47.7 V | -99.9 A | 2.03 V | 17 # |
1719640591 | 13.33 V | 47.67 V | -99.9 A | 2.03 V | 17 # |
1719639584 | 13.28 V | 47.66 V | -99.9 A | 2.03 V | 17 # |
1719638651 | 13.25 V | 47.66 V | -99.9 A | 2.03 V | 17 # |
1719637730 | 13.17 V | 47.62 V | -99.9 A | 2.03 V | 17 # |
1719636775 | 13.15 V | 47.61 V | -99.9 A | 2.03 V | 17 # |
1719635853 | 13.09 V | 47.58 V | -99.9 A | 2.03 V | 17 # |
*Used Equation Coefficients:
Batt12V: 0, 0.01, 0
Batt48V: 0, 0.01, 0
I48V: 0, 0.01, -100
Umin: 0, 0.01, 0
Cell#: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)