This is the latest recevied telemetry packets stored in our database for station/object WA7DEM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1758205450 | 12.89 Volts | 62.17 Deg.F | 0 | 0 | 0 |
| 1758203658 | 12.86 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1758200072 | 12.86 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1758198279 | 12.86 Volts | 63.05 Deg.F | 0 | 0 | 0 |
| 1758196486 | 12.89 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1758194693 | 12.86 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1758192900 | 12.86 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1758191107 | 12.89 Volts | 63.93 Deg.F | 0 | 0 | 0 |
| 1758189314 | 12.86 Volts | 64.81 Deg.F | 0 | 0 | 0 |
| 1758185729 | 12.89 Volts | 64.81 Deg.F | 0 | 0 | 0 |
| 1758180350 | 12.86 Volts | 65.69 Deg.F | 0 | 0 | 0 |
| 1758176765 | 12.89 Volts | 66.57 Deg.F | 0 | 0 | 0 |
| 1758171386 | 12.89 Volts | 68.33 Deg.F | 0 | 0 | 0 |
| 1758167800 | 12.89 Volts | 70.09 Deg.F | 0 | 0 | 0 |
| 1758164214 | 12.89 Volts | 70.97 Deg.F | 0 | 0 | 0 |
| 1758162420 | 12.89 Volts | 72.73 Deg.F | 0 | 0 | 0 |
| 1758160626 | 12.89 Volts | 74.49 Deg.F | 0 | 0 | 0 |
| 1758158833 | 12.89 Volts | 76.25 Deg.F | 0 | 0 | 0 |
| 1758157039 | 12.92 Volts | 78.01 Deg.F | 0 | 0 | 0 |
| 1758155245 | 12.92 Volts | 81.53 Deg.F | 0 | 0 | 0 |
| 1758153451 | 12.95 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1758151656 | 13.01 Volts | 85.93 Deg.F | 0 | 0 | 0 |
| 1758149861 | 13.1 Volts | 83.29 Deg.F | 0 | 0 | 0 |
| 1758146272 | 12.95 Volts | 84.17 Deg.F | 0 | 0 | 0 |
| 1758144478 | 13.04 Volts | 81.53 Deg.F | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 0.0293, 0
Value2: 0, 0.88, -459.67
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)