This is the latest recevied telemetry packets stored in our database for station/object VK4WZ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1750255274 | 123 | 0 | 0 | 0 | 27 |
| 1750251672 | 123 | 0 | 0 | 0 | 27 |
| 1750248069 | 121 | 0 | 0 | 0 | 27 |
| 1750244466 | 123 | 0 | 0 | 0 | 26 |
| 1750240863 | 124 | 0 | 0 | 0 | 26 |
| 1750237261 | 124 | 0 | 0 | 0 | 25 |
| 1750233658 | 122 | 0 | 0 | 0 | 25 |
| 1750230055 | 125 | 0 | 0 | 0 | 25 |
| 1750226452 | 126 | 0 | 0 | 0 | 25 |
| 1750222850 | 124 | 0 | 0 | 0 | 25 |
| 1750219247 | 127 | 0 | 0 | 0 | 26 |
| 1750215644 | 140 | 0 | 0 | 0 | 26 |
| 1750212042 | 139 | 0 | 0 | 0 | 27 |
| 1750208439 | 130 | 0 | 0 | 0 | 28 |
| 1750204836 | 126 | 0 | 0 | 0 | 28 |
| 1750201233 | 126 | 0 | 0 | 0 | 28 |
| 1750197631 | 121 | 0 | 0 | 0 | 28 |
| 1750194028 | 122 | 0 | 0 | 0 | 28 |
| 1750190425 | 122 | 0 | 0 | 0 | 28 |
| 1750186822 | 120 | 0 | 0 | 0 | 28 |
| 1750183220 | 122 | 0 | 0 | 0 | 28 |
| 1750179617 | 122 | 0 | 0 | 0 | 28 |
| 1750176014 | 121 | 0 | 0 | 0 | 28 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)