This is the latest recevied telemetry packets stored in our database for station/object HA2EBO-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Voltage* | BoardTemp* | CPUTemp* | Current* | Unused* |
|---|---|---|---|---|---|
| 1794910912 | 11.87 Volt | 27.29 DegC | 60.47 DegC | 0.9 A | 0 None |
| 1794909112 | 11.87 Volt | 26.35 DegC | 57.64 DegC | 0.8 A | 0 None |
| 1794907312 | 11.77 Volt | 26.35 DegC | 56.7 DegC | 0.9 A | 0 None |
| 1794905512 | 11.87 Volt | 25.41 DegC | 55.76 DegC | 0.9 A | 0 None |
| 1794903712 | 11.77 Volt | 25.41 DegC | 54.82 DegC | 0.9 A | 0 None |
| 1794901912 | 11.87 Volt | 24.47 DegC | 55.76 DegC | 0.8 A | 0 None |
| 1794900112 | 11.87 Volt | 25.41 DegC | 55.76 DegC | 0.9 A | 0 None |
| 1794898312 | 11.87 Volt | 24.47 DegC | 55.76 DegC | 1 A | 0 None |
| 1794896512 | 11.87 Volt | 24.47 DegC | 54.82 DegC | 0.8 A | 0 None |
| 1794894712 | 11.87 Volt | 24.47 DegC | 54.82 DegC | 0.8 A | 0 None |
*Used Equation Coefficients:
Voltage: 0, 0.0157, 10
BoardTemp: 0, 0.3137, 0
CPUTemp: 0, 0.3137, 20
Current: 0, 0.0118, 0
Unused: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)