APRS Track Direct

My position About ☰

reset

YM3KC-8 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object YM3KC-8. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274523	81 Pkt	4 Pkt	0 Pkt	-30 dBm	11.92 V
1836274389	6 Pkt	0 Pkt	0 Pkt	-31 dBm	11.94 V
1762267532	150 Pkt	83 Pkt	1 Pkt	-26 dBm	11.94 V
1762266541	14 Pkt	3 Pkt	0 Pkt	-27 dBm	11.94 V
1762265504	209 Pkt	0 Pkt	0 Pkt	-29 dBm	11.94 V
1762264429	197 Pkt	0 Pkt	2 Pkt	31 dBm	11.94 V
1762263185	131 Pkt	115 Pkt	73 Pkt	-26 dBm	11.94 V
1762260973	14 Pkt	5 Pkt	6 Pkt	-27 dBm	11.94 V
1762260750	98 Pkt	280 Pkt	28 Pkt	-27 dBm	11.94 V
1762259619	91 Pkt	277 Pkt	55 Pkt	-26 dBm	11.94 V
1762258482	94 Pkt	188 Pkt	34 Pkt	-27 dBm	11.94 V
1762257412	21 Pkt	8 Pkt	3 Pkt	-27 dBm	11.94 V
1762256569	165 Pkt	99 Pkt	8 Pkt	-28 dBm	11.94 V
1762255565	10 Pkt	9 Pkt	0 Pkt	-28 dBm	11.94 V
1762255564	10 Pkt	9 Pkt	0 Pkt	-27 dBm	11.94 V
1762254750	163 Pkt	79 Pkt	0 Pkt	-27 dBm	11.94 V
1762253763	15 Pkt	7 Pkt	0 Pkt	-27 dBm	11.94 V
1762253630	152 Pkt	71 Pkt	1 Pkt	-27 dBm	11.94 V
1762252594	149 Pkt	77 Pkt	2 Pkt	-27 dBm	11.94 V
1762251608	139 Pkt	96 Pkt	3 Pkt	-27 dBm	11.94 V
1762250607	8 Pkt	6 Pkt	0 Pkt	-27 dBm	11.94 V
1762250478	123 Pkt	77 Pkt	0 Pkt	-27 dBm	11.94 V
1762249496	7 Pkt	7 Pkt	0 Pkt	-26 dBm	11.94 V
1762248534	122 Pkt	103 Pkt	0 Pkt	-27 dBm	11.94 V
1762247526	129 Pkt	101 Pkt	9 Pkt	-27 dBm	11.94 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)