This is the latest recevied telemetry packets stored in our database for station/object URANUM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274856 | 12.9 | 0 | 12 | 15 | 44 |
| 1836274376 | 12.9 | 0 | 12 | 15 | 44 |
| 1836274316 | 12.9 | 0 | 12 | 15 | 45 |
| 1836274046 | 12.9 | 0 | 12 | 15 | 45 |
| 1770153869 | 13.7 | 0 | 11 | 15 | 46 |
| 1770153599 | 13.7 | 0 | 11 | 15 | 46 |
| 1770153329 | 13.7 | 0 | 12 | 15 | 46 |
| 1770153059 | 13.7 | 0 | 12 | 15 | 46 |
| 1770152789 | 13.7 | 0 | 12 | 15 | 46 |
| 1770152519 | 13.7 | 0 | 12 | 15 | 46 |
| 1770152250 | 13.7 | 0 | 11 | 15 | 45 |
| 1770151979 | 13.7 | 0 | 11 | 15 | 46 |
| 1770151709 | 13.7 | 0 | 12 | 15 | 45 |
| 1770151439 | 13.7 | 0 | 11 | 15 | 45 |
| 1770151169 | 13.6 | 0 | 12 | 15 | 45 |
| 1770150899 | 13.4 | 0 | 12 | 15 | 45 |
| 1770150629 | 13.1 | 0 | 11 | 15 | 45 |
| 1770150359 | 12.5 | 0 | 11 | 15 | 45 |
| 1770150089 | 12.5 | 0 | 11 | 15 | 44 |
| 1770149819 | 12.4 | 0 | 11 | 15 | 44 |
| 1770149282 | 13.1 | 0 | 12 | 15 | 44 |
| 1770149009 | 12.6 | 0 | 11 | 14 | 44 |
| 1770148469 | 13.7 | 0 | 11 | 15 | 44 |
| 1770148200 | 13.7 | 0 | 11 | 15 | 44 |
| 1770147931 | 13.7 | 0 | 11 | 15 | 44 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)