APRS Track Direct

My position About ☰

reset

BX5ACG-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object BX5ACG-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	CPUTemp*	RxPkts/20m*	RxPkts/1h*	RxPkts/24h*	DiGi*
1753944063	52 C	15 p	46 p	1207 p	156 p
1753942863	52 C	17 p	45 p	1208 p	151 p
1753941663	52 C	14 p	46 p	1216 p	145 p
1753940463	52 C	14 p	47 p	1220 p	141 p
1753939262	52 C	18 p	47 p	1225 p	136 p
1753938064	52 C	15 p	50 p	1230 p	131 p
1753936863	52 C	14 p	46 p	1238 p	124 p
1753935664	51 C	21 p	48 p	1243 p	119 p
1753934463	52 C	11 p	44 p	1246 p	112 p
1753933263	51 C	16 p	51 p	1253 p	109 p
1753932063	51 C	17 p	49 p	1254 p	102 p
1753930863	52 C	18 p	53 p	1257 p	95 p
1753929664	52 C	13 p	47 p	1261 p	85 p
1753928463	52 C	21 p	49 p	1266 p	81 p
1753927263	53 C	13 p	44 p	1270 p	76 p
1753926063	53 C	15 p	46 p	1283 p	72 p
1753924863	52 C	16 p	43 p	1292 p	65 p
1753923663	53 C	15 p	38 p	1297 p	58 p
1753922463	52 C	12 p	34 p	1297 p	53 p
1753921262	52 C	11 p	35 p	1318 p	50 p
1753920063	52 C	11 p	36 p	1368 p	49 p
1753918862	52 C	13 p	37 p	1380 p	48 p
1753917663	51 C	12 p	39 p	1386 p	46 p
1753916463	52 C	12 p	48 p	1393 p	45 p
1753915264	52 C	15 p	53 p	1396 p	44 p

*Used Equation Coefficients:

CPUTemp: 0, 1, 0

RxPkts/20m: 0, 1, 0

RxPkts/1h: 0, 1, 0

RxPkts/24h: 0, 1, 0

DiGi: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)