APRS Track Direct

My position About ☰

reset

HS6PNA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS6PNA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1790658994	1 ug/m3	1 ug/m3	1 ug/m3	-40 dBm	13.97 V
1790658069	1 ug/m3	1 ug/m3	1 ug/m3	-40 dBm	13.97 V
1790657144	1 ug/m3	1 ug/m3	1 ug/m3	-44 dBm	13.97 V
1790656220	1 ug/m3	1 ug/m3	1 ug/m3	-40 dBm	13.97 V
1790655295	1 ug/m3	1 ug/m3	1 ug/m3	-40 dBm	13.99 V
1790654371	1 ug/m3	2 ug/m3	3 ug/m3	-43 dBm	14.03 V
1790653446	3 ug/m3	3 ug/m3	3 ug/m3	-39 dBm	14.03 V
1790652522	2 ug/m3	4 ug/m3	4 ug/m3	-41 dBm	13.97 V
1790651597	1 ug/m3	3 ug/m3	4 ug/m3	-40 dBm	13.82 V
1790650673	3 ug/m3	5 ug/m3	5 ug/m3	-44 dBm	13.97 V
1790649748	1 ug/m3	2 ug/m3	2 ug/m3	-41 dBm	13.99 V
1790648824	1 ug/m3	3 ug/m3	3 ug/m3	-40 dBm	13.72 V
1790647899	2 ug/m3	4 ug/m3	5 ug/m3	-41 dBm	13.97 V
1790646974	2 ug/m3	4 ug/m3	6 ug/m3	-40 dBm	13.97 V
1790646050	1 ug/m3	3 ug/m3	3 ug/m3	-41 dBm	14.03 V
1790645126	1 ug/m3	4 ug/m3	4 ug/m3	-41 dBm	13.99 V
1790644201	1 ug/m3	5 ug/m3	5 ug/m3	-42 dBm	13.99 V
1790643276	1 ug/m3	3 ug/m3	3 ug/m3	-44 dBm	13.95 V
1790642352	2 ug/m3	5 ug/m3	6 ug/m3	-41 dBm	13.99 V
1790641427	1 ug/m3	4 ug/m3	4 ug/m3	-41 dBm	13.97 V
1790640503	2 ug/m3	3 ug/m3	3 ug/m3	-41 dBm	14.29 V
1790639578	20 ug/m3	34 ug/m3	38 ug/m3	-39 dBm	13.95 V
1790638652	104 ug/m3	194 ug/m3	210 ug/m3	-41 dBm	14.03 V
1790637728	1 ug/m3	4 ug/m3	5 ug/m3	-42 dBm	13.9 V
1790636803	1 ug/m3	4 ug/m3	4 ug/m3	-41 dBm	13.95 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)