APRS Track Direct

My position About ☰

reset

OE3PDB-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object OE3PDB-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	Vin*	Rx1h*	Eff1h*	Rx10m*
1786723299	12.23 Volt	340 Pkt	69 Pcnt	37 Pkt
1786719699	12.23 Volt	430 Pkt	70 Pcnt	54 Pkt
1786716100	12.23 Volt	520 Pkt	69 Pcnt	83 Pkt
1786712500	12.23 Volt	700 Pkt	76 Pcnt	85 Pkt
1786708900	12.23 Volt	740 Pkt	72 Pcnt	106 Pkt
1786705300	12.23 Volt	700 Pkt	80 Pcnt	89 Pkt
1786701700	12.23 Volt	660 Pkt	76 Pcnt	112 Pkt
1786698100	12.23 Volt	590 Pkt	63 Pcnt	95 Pkt
1786694500	12.23 Volt	640 Pkt	77 Pcnt	111 Pkt
1786690900	12.23 Volt	730 Pkt	73 Pcnt	116 Pkt
1786687301	12.23 Volt	500 Pkt	58 Pcnt	117 Pkt
1786683701	12.23 Volt	620 Pkt	79 Pcnt	85 Pkt
1786680101	12.23 Volt	620 Pkt	81 Pcnt	95 Pkt
1786676501	12.23 Volt	610 Pkt	77 Pcnt	74 Pkt
1786672901	12.23 Volt	570 Pkt	72 Pcnt	102 Pkt
1786669301	12.23 Volt	490 Pkt	69 Pcnt	94 Pkt
1786666301	12.23 Volt	70 Pkt	76 Pcnt	70 Pkt
1786662100	12.23 Volt	460 Pkt	71 Pcnt	70 Pkt
1786658500	12.23 Volt	530 Pkt	78 Pcnt	70 Pkt
1786654900	12.23 Volt	550 Pkt	76 Pcnt	87 Pkt
1786651300	12.23 Volt	410 Pkt	63 Pcnt	75 Pkt
1786647700	12.23 Volt	410 Pkt	59 Pcnt	69 Pkt
1786644101	12.23 Volt	630 Pkt	72 Pcnt	101 Pkt
1786640501	12.23 Volt	610 Pkt	74 Pcnt	94 Pkt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Rx10m: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)