This is the latest recevied telemetry packets stored in our database for station/object PARRTT. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1786755052 | 133 | 133 | 89 | 0 | 0 |
| 1786754434 | 133 | 133 | 89 | 0 | 0 |
| 1786753821 | 133 | 133 | 88 | 0 | 0 |
| 1786753204 | 133 | 133 | 87 | 0 | 0 |
| 1786752585 | 132 | 133 | 89 | 0 | 0 |
| 1786751966 | 132 | 133 | 87 | 0 | 0 |
| 1786751349 | 132 | 133 | 88 | 0 | 0 |
| 1786750734 | 132 | 133 | 88 | 0 | 0 |
| 1786750106 | 130 | 133 | 91 | 0 | 0 |
| 1786749491 | 132 | 133 | 85 | 0 | 0 |
| 1786748877 | 133 | 134 | 53 | 0 | 0 |
| 1786748254 | 133 | 133 | 84 | 0 | 0 |
| 1786747636 | 133 | 133 | 51 | 0 | 0 |
| 1786747016 | 132 | 133 | 87 | 0 | 0 |
| 1786746399 | 132 | 133 | 87 | 0 | 0 |
| 1786745786 | 132 | 133 | 85 | 0 | 0 |
| 1786745175 | 132 | 133 | 87 | 0 | 0 |
| 1786744570 | 133 | 133 | 92 | 0 | 0 |
| 1786743959 | 132 | 133 | 88 | 0 | 0 |
| 1786743351 | 133 | 133 | 86 | 0 | 0 |
| 1786742735 | 131 | 134 | 51 | 0 | 0 |
| 1786742118 | 133 | 133 | 86 | 0 | 0 |
| 1786741509 | 132 | 133 | 88 | 0 | 0 |
| 1786740898 | 133 | 133 | 89 | 0 | 0 |
| 1786740289 | 133 | 133 | 90 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)