This is the latest recevied telemetry packets stored in our database for station/object LU1QA-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
|---|---|---|---|---|---|
| 1836274051 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 5 V |
| 1763269428 | 6 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.11 V |
| 1763268501 | 0 Pkt | 0 Pkt | 0 Pkt | -24 dBm | 5.13 V |
| 1763267579 | 5 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.13 V |
| 1763266656 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763265734 | 5 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.13 V |
| 1763264811 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763263889 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763263551 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763262629 | 6 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 5.11 V |
| 1763261706 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763260784 | 6 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763259861 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763258939 | 5 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763258016 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.13 V |
| 1763257100 | 5 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763256177 | 0 Pkt | 0 Pkt | 0 Pkt | -21 dBm | 5.13 V |
| 1763255252 | 6 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763254326 | 0 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.11 V |
| 1763253414 | 4 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763252490 | 0 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.11 V |
| 1763251564 | 5 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763250636 | 0 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763249714 | 5 Pkt | 0 Pkt | 0 Pkt | -22 dBm | 5.11 V |
| 1763248792 | 0 Pkt | 0 Pkt | 0 Pkt | -23 dBm | 5.11 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)