APRS Track Direct

My position About ☰

reset

9M4GKJ-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9M4GKJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1790659661	10 Pkt	23 Pkt	12 Pkt	-59 dBm	9.19 V
1790658735	21 Pkt	10 Pkt	7 Pkt	-60 dBm	9.21 V
1790657809	5 Pkt	14 Pkt	13 Pkt	-58 dBm	9.21 V
1790656883	3 Pkt	15 Pkt	13 Pkt	-59 dBm	9.21 V
1790655958	10 Pkt	24 Pkt	9 Pkt	-59 dBm	9.19 V
1790655032	4 Pkt	20 Pkt	13 Pkt	-58 dBm	9.21 V
1790654106	3 Pkt	29 Pkt	19 Pkt	-59 dBm	9.19 V
1790653179	3 Pkt	23 Pkt	21 Pkt	-62 dBm	9.19 V
1790652253	4 Pkt	19 Pkt	15 Pkt	-59 dBm	9.21 V
1790651327	2 Pkt	25 Pkt	20 Pkt	-59 dBm	9.21 V
1790650400	6 Pkt	16 Pkt	8 Pkt	-59 dBm	9.21 V
1790649476	8 Pkt	28 Pkt	28 Pkt	-60 dBm	9.21 V
1790648548	6 Pkt	44 Pkt	42 Pkt	-60 dBm	9.19 V
1790647622	15 Pkt	11 Pkt	8 Pkt	-59 dBm	9.21 V
1790646697	16 Pkt	7 Pkt	5 Pkt	-59 dBm	9.21 V
1790645772	4 Pkt	32 Pkt	8 Pkt	-58 dBm	9.21 V
1790644845	8 Pkt	43 Pkt	17 Pkt	-59 dBm	9.21 V
1790643918	1 Pkt	4 Pkt	3 Pkt	-58 dBm	9.19 V
1790643312	7 Pkt	115 Pkt	97 Pkt	-57 dBm	9.19 V
1790642379	4 Pkt	78 Pkt	52 Pkt	-60 dBm	9.21 V
1790641450	9 Pkt	110 Pkt	83 Pkt	-60 dBm	9.17 V
1790640519	9 Pkt	33 Pkt	23 Pkt	-58 dBm	9.19 V
1790639591	17 Pkt	16 Pkt	8 Pkt	-56 dBm	9.19 V
1790638664	4 Pkt	18 Pkt	7 Pkt	-54 dBm	9.19 V
1790637738	1 Pkt	3 Pkt	2 Pkt	-54 dBm	9.21 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)