APRS Track Direct

My position About ☰

reset

9W2DCM-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2DCM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1836274529	0 Pkt	1 Pkt	2 Pkt	-32 dBm	5.27 V
1836274369	0 Pkt	4 Pkt	1 Pkt	-31 dBm	5.27 V
1780122439	0 Pkt	4 Pkt	7 Pkt	-38 dBm	5.27 V
1780121530	5 Pkt	7 Pkt	9 Pkt	-38 dBm	5.27 V
1780120620	0 Pkt	6 Pkt	1 Pkt	-43 dBm	5.27 V
1780119708	0 Pkt	7 Pkt	0 Pkt	-40 dBm	5.27 V
1780118799	0 Pkt	3 Pkt	1 Pkt	-40 dBm	5.27 V
1780117889	4 Pkt	7 Pkt	1 Pkt	-37 dBm	5.27 V
1780116981	0 Pkt	8 Pkt	1 Pkt	-36 dBm	5.27 V
1780116069	0 Pkt	6 Pkt	1 Pkt	-42 dBm	5.27 V
1780115160	0 Pkt	5 Pkt	4 Pkt	-38 dBm	5.25 V
1780114248	4 Pkt	7 Pkt	2 Pkt	-37 dBm	5.27 V
1780113340	0 Pkt	7 Pkt	5 Pkt	-42 dBm	5.27 V
1780112429	2 Pkt	7 Pkt	5 Pkt	-39 dBm	5.27 V
1780111520	0 Pkt	5 Pkt	5 Pkt	-41 dBm	5.25 V
1780110609	0 Pkt	3 Pkt	11 Pkt	-40 dBm	5.25 V
1780109699	0 Pkt	8 Pkt	7 Pkt	-39 dBm	5.27 V
1780108790	4 Pkt	6 Pkt	13 Pkt	-37 dBm	5.27 V
1780107878	0 Pkt	4 Pkt	10 Pkt	-39 dBm	5.27 V
1780106968	0 Pkt	3 Pkt	20 Pkt	-36 dBm	5.27 V
1780106060	0 Pkt	4 Pkt	5 Pkt	-38 dBm	5.27 V
1780105150	4 Pkt	6 Pkt	15 Pkt	-36 dBm	5.27 V
1780104238	0 Pkt	0 Pkt	3 Pkt	-39 dBm	5.27 V
1780103433	2 Pkt	6 Pkt	49 Pkt	-35 dBm	5.27 V
1780102522	0 Pkt	7 Pkt	2 Pkt	-37 dBm	5.27 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)