APRS Track Direct

My position About ☰

reset

9W2VAV Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2VAV. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1836274492	2 Pkt	7 Pkt	-66 dBm	4.78 V
1766141630	2 Pkt	18 Pkt	-59 dBm	5.09 V
1766139803	2 Pkt	5 Pkt	-59 dBm	5.11 V
1766137978	2 Pkt	5 Pkt	-60 dBm	5.09 V
1766136152	2 Pkt	18 Pkt	-60 dBm	5.09 V
1766134326	2 Pkt	5 Pkt	-62 dBm	5.09 V
1766132501	1 Pkt	0 Pkt	-60 dBm	5.09 V
1766130612	3 Pkt	38 Pkt	-59 dBm	5.11 V
1766128785	2 Pkt	33 Pkt	-63 dBm	5.11 V
1766126958	2 Pkt	22 Pkt	-58 dBm	5.09 V
1766125131	2 Pkt	15 Pkt	-58 dBm	5.09 V
1766123305	1 Pkt	5 Pkt	-58 dBm	5.09 V
1766121479	1 Pkt	64 Pkt	-56 dBm	5.11 V
1766119651	2 Pkt	51 Pkt	-57 dBm	5.11 V
1766117822	2 Pkt	8 Pkt	-59 dBm	5.11 V
1766115996	2 Pkt	5 Pkt	-56 dBm	5.09 V
1766114170	2 Pkt	5 Pkt	-56 dBm	5.09 V
1766112345	2 Pkt	6 Pkt	-54 dBm	5.09 V
1766110518	2 Pkt	15 Pkt	-54 dBm	5.09 V
1766108691	1 Pkt	34 Pkt	-54 dBm	5.09 V
1766106865	2 Pkt	14 Pkt	-54 dBm	5.11 V
1766105039	2 Pkt	7 Pkt	-54 dBm	5.11 V
1766103213	2 Pkt	10 Pkt	-55 dBm	5.09 V
1766101387	2 Pkt	10 Pkt	-55 dBm	5.09 V
1766099561	2 Pkt	14 Pkt	-54 dBm	5.11 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)