APRS Track Direct

My position About ☰

reset

LU1QA-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object LU1QA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1774475279	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.59 V
1774473457	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.67 V
1774471635	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.8 V
1774469812	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.9 V
1774467991	0 Pkt	0 Pkt	0 Pkt	31 dBm	13.66 V
1774466169	4 Pkt	0 Pkt	0 Pkt	31 dBm	13.6 V
1774464347	1 Pkt	0 Pkt	0 Pkt	31 dBm	13.47 V
1774462524	0 Pkt	0 Pkt	0 Pkt	31 dBm	13.64 V
1774460702	0 Pkt	0 Pkt	0 Pkt	31 dBm	13.7 V
1774457058	3 Pkt	0 Pkt	0 Pkt	31 dBm	13.72 V
1774455235	12 Pkt	0 Pkt	0 Pkt	31 dBm	13.8 V
1774453410	9 Pkt	0 Pkt	0 Pkt	31 dBm	14.66 V
1774451586	14 Pkt	0 Pkt	0 Pkt	31 dBm	14.77 V
1774449762	12 Pkt	0 Pkt	0 Pkt	31 dBm	14.62 V
1774446113	1 Pkt	0 Pkt	0 Pkt	31 dBm	14.38 V
1774444291	1 Pkt	0 Pkt	0 Pkt	31 dBm	13.8 V
1774429707	12 Pkt	0 Pkt	0 Pkt	31 dBm	12.41 V
1774420603	-	-	-	-	-
1774418764	10 Pkt	0 Pkt	0 Pkt	31 dBm	12.43 V
1774416936	8 Pkt	0 Pkt	0 Pkt	31 dBm	12.45 V
1774400529	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.57 V
1774398707	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.59 V
1774396885	0 Pkt	0 Pkt	0 Pkt	31 dBm	12.59 V
1774395064	8 Pkt	0 Pkt	0 Pkt	31 dBm	12.59 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)