This is the latest recevied telemetry packets stored in our database for station/object NS6X. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Sate* | Temp* | Volt* | Alt* | A5* |
|---|---|---|---|---|---|
| 1794880419 | 12 | 30.6 C | 4.21 V | 2020 M | 0 |
| 1794880119 | 11 | 31 C | 4.21 V | 2150 M | 0 |
| 1794880019 | 12 | 30.9 C | 4.21 V | 2130 M | 0 |
| 1794879718 | 11 | 30.8 C | 4.22 V | 1990 M | 0 |
| 1794879618 | 11 | 30.8 C | 4.21 V | 1990 M | 0 |
| 1794879518 | 11 | 30.6 C | 4.21 V | 1930 M | 0 |
| 1794879318 | 11 | 30.5 C | 4.21 V | 1890 M | 0 |
| 1794878719 | 11 | 30.5 C | 4.22 V | 1750 M | 0 |
| 1794875215 | 12 | 31.5 C | 4.21 V | 1320 M | 0 |
| 1794875014 | 12 | 31.6 C | 4.21 V | 1270 M | 0 |
| 1794874914 | 12 | 31.7 C | 4.21 V | 1240 M | 0 |
| 1794874814 | 12 | 31.6 C | 4.21 V | 1260 M | 0 |
| 1794874514 | 12 | 31.5 C | 4.21 V | 1230 M | 0 |
| 1794874414 | 12 | 31.3 C | 4.21 V | 1220 M | 0 |
| 1794874314 | 12 | 31.2 C | 4.2 V | 1210 M | 0 |
| 1794874214 | 12 | 31 C | 4.21 V | 1200 M | 0 |
| 1794867751 | 11 | 34.3 C | 4.22 V | 1080 M | 0 |
| 1794865142 | 10 | 34.8 C | 4.21 V | 930 M | 0 |
| 1794860337 | 12 | 35.8 C | 4.22 V | 510 M | 0 |
| 1794860244 | 12 | 35.8 C | 4.22 V | 490 M | 0 |
| 1794860144 | 11 | 35.8 C | 4.22 V | 480 M | 0 |
| 1794860040 | 11 | 35.8 C | 4.22 V | 490 M | 0 |
| 1794852340 | 10 | 37.5 C | 4.2 V | 360 M | 0 |
| 1794851756 | 11 | 37.5 C | 4.21 V | 340 M | 0 |
| 1794846369 | 8 | 37.8 C | 4.21 V | 190 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)