APRS Track Direct

My position About ☰

reset

ON0TVO Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0TVO. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Temp*	Rx1h*	Dg1h*	Eff1h*	Eff*
1836274432	21 C	390 Pkt	120 Pkt	45 Pcnt	63 Pcnt
1836274286	21 C	390 Pkt	120 Pkt	44 Pcnt	63 Pcnt
1762290519	13 C	520 Pkt	120 Pkt	66 Pcnt	65 Pcnt
1762289919	13 C	530 Pkt	120 Pkt	66 Pcnt	65 Pcnt
1762289320	13 C	550 Pkt	130 Pkt	67 Pcnt	65 Pcnt
1762288720	13 C	580 Pkt	140 Pkt	67 Pcnt	65 Pcnt
1762288121	13.5 C	630 Pkt	150 Pkt	68 Pcnt	65 Pcnt
1762287526	13.5 C	670 Pkt	160 Pkt	68 Pcnt	65 Pcnt
1762286924	13.5 C	700 Pkt	160 Pkt	69 Pcnt	65 Pcnt
1762286320	13.5 C	710 Pkt	160 Pkt	67 Pcnt	65 Pcnt
1762285722	13.5 C	720 Pkt	160 Pkt	67 Pcnt	65 Pcnt
1762285120	13.5 C	700 Pkt	150 Pkt	67 Pcnt	65 Pcnt
1762284520	13.5 C	670 Pkt	140 Pkt	66 Pcnt	65 Pcnt
1762283320	13.5 C	670 Pkt	160 Pkt	64 Pcnt	65 Pcnt
1762282720	13.5 C	690 Pkt	150 Pkt	65 Pcnt	65 Pcnt
1762282120	13.5 C	730 Pkt	160 Pkt	66 Pcnt	65 Pcnt
1762281520	13.5 C	790 Pkt	160 Pkt	67 Pcnt	65 Pcnt
1762280920	13.5 C	820 Pkt	160 Pkt	68 Pcnt	65 Pcnt
1762280324	14 C	840 Pkt	150 Pkt	67 Pcnt	65 Pcnt
1762279720	14 C	850 Pkt	140 Pkt	69 Pcnt	65 Pcnt
1762279120	14 C	900 Pkt	150 Pkt	70 Pcnt	65 Pcnt
1762278529	14 C	900 Pkt	160 Pkt	69 Pcnt	65 Pcnt
1762277921	14 C	930 Pkt	170 Pkt	69 Pcnt	65 Pcnt
1762277325	14 C	940 Pkt	180 Pkt	69 Pcnt	65 Pcnt
1762276743	14 C	910 Pkt	180 Pkt	69 Pcnt	65 Pcnt

*Used Equation Coefficients:

Temp: 0, 0.5, -64

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Eff: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)