APRS Track Direct

My position About ☰

reset

TA2WI-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object TA2WI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	TxTraffic*	RxDrop*	RSSI*	Voltage*
1786742599	132 Pkt	5 Pkt	2 Pkt	-45 dBm	12.33 V
1786741660	143 Pkt	4 Pkt	2 Pkt	-45 dBm	12.33 V
1786740718	136 Pkt	7 Pkt	1 Pkt	-43 dBm	12.33 V
1786739780	158 Pkt	4 Pkt	2 Pkt	-43 dBm	12.33 V
1786738836	137 Pkt	7 Pkt	0 Pkt	-43 dBm	12.33 V
1786737894	170 Pkt	12 Pkt	1 Pkt	-43 dBm	12.33 V
1786736944	138 Pkt	9 Pkt	0 Pkt	-44 dBm	12.33 V
1786735999	176 Pkt	4 Pkt	0 Pkt	-43 dBm	12.33 V
1786735054	91 Pkt	8 Pkt	1 Pkt	-43 dBm	12.33 V
1786734117	143 Pkt	6 Pkt	0 Pkt	-44 dBm	12.33 V
1786733172	119 Pkt	15 Pkt	0 Pkt	-43 dBm	12.33 V
1786732225	152 Pkt	4 Pkt	0 Pkt	-42 dBm	12.33 V
1786731283	149 Pkt	1 Pkt	0 Pkt	-43 dBm	12.33 V
1786730345	152 Pkt	9 Pkt	7 Pkt	-43 dBm	12.33 V
1786729396	126 Pkt	12 Pkt	4 Pkt	-43 dBm	12.33 V
1786728448	184 Pkt	1 Pkt	1 Pkt	-44 dBm	12.33 V
1786727506	141 Pkt	16 Pkt	0 Pkt	-43 dBm	12.33 V
1786726558	165 Pkt	8 Pkt	0 Pkt	-43 dBm	12.33 V
1786725610	162 Pkt	4 Pkt	1 Pkt	-44 dBm	12.33 V
1786724669	100 Pkt	4 Pkt	0 Pkt	-44 dBm	12.33 V
1786723934	143 Pkt	14 Pkt	5 Pkt	-43 dBm	12.33 V
1786722989	140 Pkt	14 Pkt	2 Pkt	-44 dBm	12.33 V
1786722041	144 Pkt	4 Pkt	0 Pkt	-43 dBm	12.33 V
1786721101	10 Pkt	0 Pkt	0 Pkt	-43 dBm	12.33 V
1786720555	117 Pkt	7 Pkt	3 Pkt	-44 dBm	12.33 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)