APRS Track Direct

My position About ☰

reset

E24CR-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object E24CR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	PM1.0*	PM2.5*	PM10*	RSSI*	Voltage*
1758175270	10 ug/m3	14 ug/m3	15 ug/m3	-26 dBm	15.01 V
1758174645	11 ug/m3	15 ug/m3	16 ug/m3	-27 dBm	14.68 V
1758174019	10 ug/m3	14 ug/m3	15 ug/m3	-26 dBm	14.77 V
1758173395	11 ug/m3	15 ug/m3	16 ug/m3	-27 dBm	14.7 V
1758172770	10 ug/m3	15 ug/m3	15 ug/m3	-27 dBm	14.54 V
1758172144	10 ug/m3	15 ug/m3	15 ug/m3	-26 dBm	14.36 V
1758171519	10 ug/m3	14 ug/m3	14 ug/m3	-27 dBm	14.52 V
1758170894	9 ug/m3	12 ug/m3	13 ug/m3	-25 dBm	14.54 V
1758170268	9 ug/m3	12 ug/m3	13 ug/m3	-27 dBm	14.4 V
1758169642	8 ug/m3	11 ug/m3	12 ug/m3	-29 dBm	14.21 V
1758169015	8 ug/m3	12 ug/m3	12 ug/m3	-26 dBm	14.11 V
1758168390	9 ug/m3	12 ug/m3	13 ug/m3	-27 dBm	14.15 V
1758167766	9 ug/m3	12 ug/m3	12 ug/m3	-26 dBm	14.52 V
1758167141	9 ug/m3	12 ug/m3	13 ug/m3	-29 dBm	14.46 V
1758166516	8 ug/m3	10 ug/m3	11 ug/m3	-26 dBm	14.29 V
1758165890	8 ug/m3	12 ug/m3	12 ug/m3	-29 dBm	14.31 V
1758165264	8 ug/m3	12 ug/m3	13 ug/m3	-28 dBm	14.23 V
1758164640	8 ug/m3	11 ug/m3	12 ug/m3	-28 dBm	14.13 V
1758164013	8 ug/m3	11 ug/m3	12 ug/m3	-28 dBm	14.09 V
1758163388	6 ug/m3	9 ug/m3	9 ug/m3	-29 dBm	14.07 V
1758162762	6 ug/m3	8 ug/m3	9 ug/m3	-28 dBm	13.86 V
1758162137	6 ug/m3	8 ug/m3	9 ug/m3	-29 dBm	13.74 V
1758161512	5 ug/m3	7 ug/m3	8 ug/m3	-28 dBm	13.64 V
1758160886	5 ug/m3	7 ug/m3	8 ug/m3	-28 dBm	13.6 V
1758160261	4 ug/m3	6 ug/m3	7 ug/m3	-28 dBm	13.45 V

*Used Equation Coefficients:

PM1.0: 0, 1, 0

PM2.5: 0, 1, 0

PM10: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)