APRS Track Direct

My position About ☰

reset

9W2VIS-1 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object 9W2VIS-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 >>

Time	Avg 10m*	Avg 10m*	RxPkts*	IGateDropRx*	TxPkts*
1836274831	0 Rx Erlang	0 Tx Erlang	0 count/10m	0 count/10m	1 count/10m
1762197757	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	2 count/10m	4 count/10m
1762196557	0.01 Rx Erlang	0 Tx Erlang	6 count/10m	2 count/10m	4 count/10m
1762195357	0.02 Rx Erlang	0.01 Tx Erlang	11 count/10m	5 count/10m	4 count/10m
1762194157	0.01 Rx Erlang	0 Tx Erlang	8 count/10m	3 count/10m	3 count/10m
1762192957	0 Rx Erlang	0 Tx Erlang	3 count/10m	1 count/10m	2 count/10m
1762191757	0.02 Rx Erlang	0.01 Tx Erlang	12 count/10m	4 count/10m	4 count/10m
1762190557	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	4 count/10m
1762189357	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	2 count/10m	4 count/10m
1762188157	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	1 count/10m	3 count/10m
1762186957	0.01 Rx Erlang	0 Tx Erlang	2 count/10m	1 count/10m	2 count/10m
1762185757	0.01 Rx Erlang	0.01 Tx Erlang	6 count/10m	1 count/10m	4 count/10m
1762184557	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	3 count/10m
1762183357	0.01 Rx Erlang	0.01 Tx Erlang	4 count/10m	0 count/10m	5 count/10m
1762182157	0.02 Rx Erlang	0.01 Tx Erlang	16 count/10m	0 count/10m	13 count/10m
1762180957	0.01 Rx Erlang	0.01 Tx Erlang	10 count/10m	0 count/10m	7 count/10m
1762179757	0.01 Rx Erlang	0.01 Tx Erlang	9 count/10m	0 count/10m	9 count/10m
1762178557	0.01 Rx Erlang	0 Tx Erlang	3 count/10m	0 count/10m	3 count/10m
1762177357	0.01 Rx Erlang	0 Tx Erlang	4 count/10m	1 count/10m	3 count/10m
1762176157	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	6 count/10m
1762174957	0.01 Rx Erlang	0.01 Tx Erlang	5 count/10m	0 count/10m	4 count/10m
1762173757	0 Rx Erlang	0.01 Tx Erlang	2 count/10m	0 count/10m	3 count/10m
1762172556	0.01 Rx Erlang	0.01 Tx Erlang	8 count/10m	0 count/10m	5 count/10m
1762171357	0.01 Rx Erlang	0.01 Tx Erlang	11 count/10m	0 count/10m	10 count/10m
1762170156	0.01 Rx Erlang	0 Tx Erlang	5 count/10m	0 count/10m	3 count/10m

*Used Equation Coefficients:

Avg 10m: 0, 0.005, 0

RxPkts: 0, 1, 0

IGateDropRx: 0, 1, 0

TxPkts: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)