This is the latest recevied telemetry packets stored in our database for station/object S57AJJ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | I acu* | I sol* | U2* | Rx1h* | Temp* |
|---|---|---|---|---|---|
| 1836274567 | -0.46 A | -0 A | 12.3 Volt | 980 Pkt | 19.5 C |
| 1836274417 | -0.46 A | -0 A | 12.3 Volt | 960 Pkt | 19 C |
| 1836274267 | -0.46 A | -0 A | 12.3 Volt | 990 Pkt | 19.5 C |
| 1836274117 | -0.46 A | -0 A | 12.3 Volt | 970 Pkt | 19 C |
| 1836273967 | -0.46 A | -0 A | 12.3 Volt | 1010 Pkt | 19.5 C |
| 1774107588 | -0.12 A | 0.58 A | 12.8 Volt | 780 Pkt | 12 C |
| 1774084188 | 1.16 A | 1.73 A | 13.8 Volt | 630 Pkt | 12.5 C |
| 1774075188 | 1.04 A | 1.62 A | 13 Volt | 870 Pkt | 5.5 C |
| 1774067988 | -0.58 A | -0 A | 12.3 Volt | 950 Pkt | 4.5 C |
| 1774066188 | -0.58 A | -0 A | 12.3 Volt | 970 Pkt | 4.5 C |
| 1774064389 | -0.58 A | -0 A | 12.3 Volt | 1000 Pkt | 4.5 C |
| 1774062588 | -0.58 A | -0 A | 12.3 Volt | 970 Pkt | 5 C |
| 1774058988 | -0.58 A | -0 A | 12.3 Volt | 990 Pkt | 5 C |
| 1774057188 | -0.58 A | -0 A | 12.3 Volt | 1010 Pkt | 5 C |
| 1774048188 | -0.58 A | -0 A | 12.4 Volt | 980 Pkt | 6 C |
| 1774044596 | -0.69 A | -0 A | 12.4 Volt | 780 Pkt | 7 C |
| 1774037390 | -0.58 A | -0 A | 12.5 Volt | 790 Pkt | 9 C |
| 1774033788 | -0.58 A | -0 A | 12.5 Volt | 710 Pkt | 10.5 C |
| 1774030189 | -0.58 A | -0 A | 12.5 Volt | 690 Pkt | 12 C |
| 1774028388 | -0.58 A | -0 A | 12.5 Volt | 670 Pkt | 13 C |
*Used Equation Coefficients:
I acu: 0, -0.1156, 14.6812
I sol: 0, 0.1156, -14.6812
U2: 0, 0.1, 0
Rx1h: 0, 10, 0
Temp: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)