This is the latest recevied telemetry packets stored in our database for station/object ZS0PMB-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Rx1h* | Dg1h* | Eff1h* | A5* |
---|---|---|---|---|---|
1732295290 | 12.7 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732293488 | 12.78 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732291686 | 12.78 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732289885 | 13.01 Volt | 0 Pkt | 0 Pkt | 50 Pcnt | 0 None |
1732288083 | 12.78 Volt | 0 Pkt | 0 Pkt | 42 Pcnt | 0 None |
1732286281 | 13.23 Volt | 0 Pkt | 0 Pkt | 75 Pcnt | 0 None |
1732284479 | 13.46 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732282678 | 12.78 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732280876 | 12.78 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732279074 | 12.93 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732277272 | 13.31 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732275471 | 13.39 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732273669 | 13.39 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732271867 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732270065 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732268263 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732266462 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732264660 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732262858 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732261056 | 13.54 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732259255 | 14.15 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732257453 | 14.15 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732255651 | 13.92 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732253849 | 13.16 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
1732252048 | 13.39 Volt | 0 Pkt | 0 Pkt | 100 Pcnt | 0 None |
*Used Equation Coefficients:
Vin: 0, 0.0765, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
A5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)