This is the latest recevied telemetry packets stored in our database for station/object E21TMW-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1732271988 | 0 | 0 | 0 | -65 | 19200 |
| 1732271689 | 0 | 0 | 0 | -66 | 19200 |
| 1732271389 | 1 | 0 | 0 | -66 | 19200 |
| 1732271089 | 0 | 0 | 0 | -63 | 19200 |
| 1732270788 | 0 | 0 | 0 | -64 | 19200 |
| 1732270489 | 1 | 0 | 0 | -64 | 19200 |
| 1732270208 | 0 | 0 | 0 | -63 | 19200 |
| 1732269888 | 0 | 0 | 0 | -66 | 19200 |
| 1732269589 | 2 | 0 | 0 | -66 | 19200 |
| 1732269288 | 0 | 0 | 0 | -63 | 19200 |
| 1732268988 | 0 | 0 | 0 | -64 | 19200 |
| 1732268689 | 1 | 0 | 0 | -65 | 19200 |
| 1732268388 | 1 | 0 | 0 | -66 | 19200 |
| 1732268088 | 0 | 0 | 0 | -64 | 19200 |
| 1732267789 | 2 | 0 | 0 | -64 | 19200 |
| 1732267488 | 3 | 0 | 0 | -65 | 19200 |
| 1732267188 | 2 | 0 | 0 | -64 | 19200 |
| 1732266888 | 2 | 0 | 0 | -63 | 19200 |
| 1732266589 | 2 | 0 | 0 | -64 | 19200 |
| 1732266288 | 0 | 0 | 0 | -64 | 19200 |
| 1732265988 | 1 | 0 | 0 | -65 | 19200 |
| 1732265688 | 0 | 0 | 0 | -65 | 19200 |
| 1732265388 | 0 | 0 | 0 | -64 | 19200 |
| 1732265089 | 2 | 0 | 0 | -64 | 19200 |
| 1732264788 | 1 | 0 | 0 | -64 | 19200 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)