APRS Track Direct

My position About ☰

reset

PU4AAP-15 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object PU4AAP-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	RxTraffic*	RxDrop*	RSSI*	Voltage*
1752717279	15 Pkt	50 Pkt	-77 dBm	0.06 V
1752716649	7 Pkt	48 Pkt	-75 dBm	0.06 V
1752716023	24 Pkt	59 Pkt	-76 dBm	0.06 V
1752715391	11 Pkt	58 Pkt	-75 dBm	0.06 V
1752714752	5 Pkt	68 Pkt	-76 dBm	0.06 V
1752714114	12 Pkt	55 Pkt	-76 dBm	0.06 V
1752713483	26 Pkt	11 Pkt	-76 dBm	0.06 V
1752712856	13 Pkt	1 Pkt	-75 dBm	0.06 V
1752712231	24 Pkt	10 Pkt	-76 dBm	0.06 V
1752711606	16 Pkt	1 Pkt	-77 dBm	0.06 V
1752710981	7 Pkt	2 Pkt	-76 dBm	0.06 V
1752710356	26 Pkt	11 Pkt	-75 dBm	0.06 V
1752709730	17 Pkt	14 Pkt	-76 dBm	0.06 V
1752709106	18 Pkt	12 Pkt	-75 dBm	0.06 V
1752708477	16 Pkt	15 Pkt	-75 dBm	0.06 V
1752707851	8 Pkt	13 Pkt	-75 dBm	0.06 V
1752707227	23 Pkt	18 Pkt	-74 dBm	0.06 V
1752706601	19 Pkt	4 Pkt	-76 dBm	0.06 V
1752705976	21 Pkt	3 Pkt	-74 dBm	0.06 V
1752705351	19 Pkt	11 Pkt	-79 dBm	0.06 V
1752704726	18 Pkt	4 Pkt	-80 dBm	0.06 V
1752704097	16 Pkt	0 Pkt	-86 dBm	0.06 V
1752703472	19 Pkt	1 Pkt	-78 dBm	0.06 V
1752702847	23 Pkt	2 Pkt	-79 dBm	0.06 V
1752702223	70 Pkt	0 Pkt	-85 dBm	0.06 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)