This is the latest recevied telemetry packets stored in our database for station/object K7QEQ-5. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | Value1* | Value2* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1794906899 | 401 | 607 | 0 | 0 | 0 |
| 1794906777 | 402 | 607 | 0 | 0 | 0 |
| 1794906658 | 401 | 607 | 0 | 0 | 0 |
| 1794906539 | 401 | 608 | 0 | 0 | 0 |
| 1794906301 | 401 | 607 | 0 | 0 | 0 |
| 1794906182 | 401 | 607 | 0 | 0 | 0 |
| 1794906063 | 401 | 607 | 0 | 0 | 0 |
| 1794905825 | 401 | 607 | 0 | 0 | 0 |
| 1794905697 | 401 | 608 | 0 | 0 | 0 |
| 1794905578 | 401 | 608 | 0 | 0 | 0 |
| 1794905102 | 400 | 607 | 0 | 0 | 0 |
| 1794904983 | 400 | 608 | 0 | 0 | 0 |
| 1794904864 | 401 | 608 | 0 | 0 | 0 |
| 1794904745 | 401 | 608 | 0 | 0 | 0 |
| 1794904626 | 400 | 608 | 0 | 0 | 0 |
| 1794904507 | 401 | 608 | 0 | 0 | 0 |
| 1794904388 | 400 | 608 | 0 | 0 | 0 |
| 1794904269 | 401 | 607 | 0 | 0 | 0 |
| 1794904150 | 401 | 607 | 0 | 0 | 0 |
| 1794904031 | 401 | 608 | 0 | 0 | 0 |
| 1794903912 | 401 | 607 | 0 | 0 | 0 |
| 1794903793 | 401 | 607 | 0 | 0 | 0 |
| 1794903555 | 401 | 609 | 0 | 0 | 0 |
| 1794903436 | 401 | 607 | 0 | 0 | 0 |
| 1794903198 | 401 | 607 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)