This is the latest recevied telemetry packets stored in our database for station/object SQ6IUS-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
| Time | V_Batt* | V_Ext* | Value3* | Value4* | Value5* |
|---|---|---|---|---|---|
| 1836274671 | 4.16 VDC | 10.46 VDC | 0 | 0 | 0 |
| 1770153508 | 4.21 VDC | 12.54 VDC | 0 | 0 | 0 |
| 1770152608 | 4.21 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1770151708 | 4.21 VDC | 12.58 VDC | 0 | 0 | 0 |
| 1770150815 | 4.21 VDC | 12.56 VDC | 0 | 0 | 0 |
| 1770149908 | 4.21 VDC | 12.6 VDC | 0 | 0 | 0 |
| 1770149008 | 4.21 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1770148108 | 4.21 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1770147208 | 4.21 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1770146308 | 4.21 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1770145408 | 4.21 VDC | 12.64 VDC | 0 | 0 | 0 |
| 1770144508 | 4.21 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1770143607 | 4.21 VDC | 12.62 VDC | 0 | 0 | 0 |
| 1770142707 | 4.21 VDC | 12.66 VDC | 0 | 0 | 0 |
| 1770141807 | 4.21 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1770140907 | 4.21 VDC | 12.68 VDC | 0 | 0 | 0 |
| 1770140007 | 4.21 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1770139107 | 4.21 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1770138207 | 4.22 VDC | 12.72 VDC | 0 | 0 | 0 |
| 1770137307 | 4.21 VDC | 12.7 VDC | 0 | 0 | 0 |
| 1770136407 | 4.21 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1770135506 | 4.21 VDC | 12.74 VDC | 0 | 0 | 0 |
| 1770134606 | 4.22 VDC | 12.78 VDC | 0 | 0 | 0 |
| 1770133707 | 4.21 VDC | 12.8 VDC | 0 | 0 | 0 |
| 1770132811 | 4.21 VDC | 12.86 VDC | 0 | 0 | 0 |
*Used Equation Coefficients:
V_Batt: 0, 0.01, 0
V_Ext: 0, 0.02, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)