APRS Track Direct

My position About ☰

reset

ON0LB-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object ON0LB-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Effto*
1754016268	12.8 Volt	1070 Pkt	350 Pkt	76 Pcnt	69 Pcnt
1754015668	12.8 Volt	1040 Pkt	350 Pkt	75 Pcnt	69 Pcnt
1754015067	12.8 Volt	1010 Pkt	340 Pkt	75 Pcnt	69 Pcnt
1754014467	12.8 Volt	1010 Pkt	340 Pkt	76 Pcnt	69 Pcnt
1754013866	12.8 Volt	1030 Pkt	350 Pkt	76 Pcnt	69 Pcnt
1754013266	12.8 Volt	1040 Pkt	350 Pkt	76 Pcnt	69 Pcnt
1754012665	12.8 Volt	1030 Pkt	350 Pkt	76 Pcnt	69 Pcnt
1754012064	12.8 Volt	1050 Pkt	370 Pkt	75 Pcnt	69 Pcnt
1754011464	12.8 Volt	1030 Pkt	370 Pkt	75 Pcnt	69 Pcnt
1754010863	12.8 Volt	1040 Pkt	360 Pkt	75 Pcnt	69 Pcnt
1754010263	12.8 Volt	1030 Pkt	360 Pkt	74 Pcnt	69 Pcnt
1754009662	12.8 Volt	1000 Pkt	360 Pkt	73 Pcnt	69 Pcnt
1754009062	12.8 Volt	1010 Pkt	350 Pkt	72 Pcnt	69 Pcnt
1754008461	12.8 Volt	980 Pkt	330 Pkt	73 Pcnt	69 Pcnt
1754007861	12.8 Volt	970 Pkt	320 Pkt	73 Pcnt	69 Pcnt
1754007260	12.8 Volt	960 Pkt	320 Pkt	72 Pcnt	69 Pcnt
1754006659	12.8 Volt	940 Pkt	300 Pkt	70 Pcnt	69 Pcnt
1754006059	12.8 Volt	920 Pkt	290 Pkt	70 Pcnt	69 Pcnt
1754005458	12.8 Volt	900 Pkt	290 Pkt	70 Pcnt	69 Pcnt
1754004858	12.8 Volt	880 Pkt	290 Pkt	70 Pcnt	69 Pcnt
1754004257	12.8 Volt	860 Pkt	300 Pkt	69 Pcnt	69 Pcnt
1754003657	12.8 Volt	820 Pkt	290 Pkt	68 Pcnt	69 Pcnt
1754003056	12.8 Volt	810 Pkt	300 Pkt	69 Pcnt	69 Pcnt
1754002456	12.8 Volt	800 Pkt	300 Pkt	70 Pcnt	69 Pcnt
1754001855	12.8 Volt	780 Pkt	300 Pkt	69 Pcnt	69 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.079, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Effto: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)