APRS Track Direct

My position About ☰

reset

EUGENE Telemetry

This is the latest recevied telemetry packets stored in our database for station/object EUGENE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*
1758209505	13.73 Volt	550 Pkt	90 Pkt	79 Pcnt
1758208905	13.73 Volt	490 Pkt	80 Pkt	80 Pcnt
1758208305	13.58 Volt	460 Pkt	80 Pkt	80 Pcnt
1758207705	13.65 Volt	470 Pkt	70 Pkt	81 Pcnt
1758207105	13.73 Volt	490 Pkt	70 Pkt	83 Pcnt
1758206506	13.73 Volt	470 Pkt	60 Pkt	86 Pcnt
1758205905	13.58 Volt	460 Pkt	50 Pkt	85 Pcnt
1758205306	13.73 Volt	510 Pkt	50 Pkt	85 Pcnt
1758204706	13.65 Volt	570 Pkt	50 Pkt	86 Pcnt
1758204106	13.73 Volt	570 Pkt	40 Pkt	86 Pcnt
1758203505	13.58 Volt	560 Pkt	30 Pkt	84 Pcnt
1758202906	13.43 Volt	560 Pkt	30 Pkt	83 Pcnt
1758202306	13.73 Volt	550 Pkt	30 Pkt	84 Pcnt
1758201706	13.65 Volt	570 Pkt	30 Pkt	85 Pcnt
1758201106	13.65 Volt	540 Pkt	30 Pkt	84 Pcnt
1758200506	13.73 Volt	530 Pkt	30 Pkt	83 Pcnt
1758199906	13.65 Volt	530 Pkt	30 Pkt	85 Pcnt
1758199306	13.73 Volt	520 Pkt	30 Pkt	86 Pcnt
1758198706	13.73 Volt	520 Pkt	30 Pkt	86 Pcnt
1758198106	13.65 Volt	500 Pkt	30 Pkt	85 Pcnt
1758197506	13.73 Volt	510 Pkt	30 Pkt	86 Pcnt
1758196906	13.73 Volt	500 Pkt	30 Pkt	88 Pcnt
1758196306	13.73 Volt	490 Pkt	40 Pkt	88 Pcnt
1758195706	13.73 Volt	490 Pkt	40 Pkt	87 Pcnt
1758195106	13.73 Volt	490 Pkt	40 Pkt	87 Pcnt

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Value5: 0, 0, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)