APRS Track Direct

My position About ☰

reset

HS5SQI-3 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object HS5SQI-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	RxTraffic*	TxTraffic*	RSSI*	Voltage*
1732520951	1 Pkt	0 Pkt	-39 dBm	8.22 V
1732520329	0 Pkt	0 Pkt	-39 dBm	8.22 V
1732519707	1 Pkt	0 Pkt	-40 dBm	8.22 V
1732519085	1 Pkt	0 Pkt	-40 dBm	8.22 V
1732518463	1 Pkt	0 Pkt	-40 dBm	8.22 V
1732517841	1 Pkt	0 Pkt	-40 dBm	8.22 V
1732517219	0 Pkt	0 Pkt	-41 dBm	8.47 V
1732516597	1 Pkt	0 Pkt	-40 dBm	8.47 V
1732515975	0 Pkt	0 Pkt	-40 dBm	8.22 V
1732515353	0 Pkt	0 Pkt	-41 dBm	8.47 V
1732514731	1 Pkt	0 Pkt	-40 dBm	8.47 V
1732514109	0 Pkt	0 Pkt	-41 dBm	8.22 V
1732513487	3 Pkt	0 Pkt	-40 dBm	8.22 V
1732512865	10 Pkt	0 Pkt	-39 dBm	8.47 V
1732512242	2 Pkt	0 Pkt	-40 dBm	8.22 V
1732511621	14 Pkt	0 Pkt	-40 dBm	8.45 V
1732510998	1 Pkt	0 Pkt	-40 dBm	8.47 V
1732510376	5 Pkt	0 Pkt	-40 dBm	8.22 V
1732509754	1 Pkt	0 Pkt	-39 dBm	8.47 V
1732509132	1 Pkt	0 Pkt	-39 dBm	8.47 V
1732508510	0 Pkt	1 Pkt	-40 dBm	8.22 V
1732507888	1 Pkt	0 Pkt	-40 dBm	8.22 V
1732507266	1 Pkt	0 Pkt	-40 dBm	8.47 V
1732506644	0 Pkt	0 Pkt	-39 dBm	8.22 V
1732506022	1 Pkt	0 Pkt	-40 dBm	8.22 V

*Used Equation Coefficients:

RxTraffic: 0, 1, 0

TxTraffic: 0, 1, 0

RxDrop: 0, 1, 0

RSSI: 0, -1, 0

Voltage: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)