APRS Track Direct

My position About ☰

reset

SP8EBC-2 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP8EBC-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Rx10min*	Tx10min*	Digi10min*	srvrTimeout*	Uptime*
1758196366	9 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours
1758195766	8 Pkt	4 Pkt	0 Pkt	8 Cnt	0 Hours
1758195166	16 Pkt	1 Pkt	0 Pkt	4 Cnt	0 Hours
1758194129	7 Pkt	1 Pkt	0 Pkt	24 Cnt	1 Hours
1758193529	19 Pkt	1 Pkt	0 Pkt	20 Cnt	0 Hours
1758192930	8 Pkt	1 Pkt	0 Pkt	16 Cnt	0 Hours
1758192329	8 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours
1758191729	18 Pkt	4 Pkt	0 Pkt	8 Cnt	0 Hours
1758191129	5 Pkt	1 Pkt	0 Pkt	4 Cnt	0 Hours
1758190092	15 Pkt	1 Pkt	0 Pkt	24 Cnt	1 Hours
1758189492	12 Pkt	1 Pkt	0 Pkt	20 Cnt	0 Hours
1758188892	8 Pkt	1 Pkt	0 Pkt	16 Cnt	0 Hours
1758188292	13 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours
1758187692	7 Pkt	4 Pkt	0 Pkt	8 Cnt	0 Hours
1758187092	8 Pkt	1 Pkt	0 Pkt	4 Cnt	0 Hours
1758186053	19 Pkt	1 Pkt	0 Pkt	24 Cnt	1 Hours
1758185453	4 Pkt	1 Pkt	0 Pkt	20 Cnt	0 Hours
1758184853	12 Pkt	5 Pkt	4 Pkt	16 Cnt	0 Hours
1758184253	25 Pkt	12 Pkt	11 Pkt	12 Cnt	0 Hours
1758183653	31 Pkt	18 Pkt	14 Pkt	8 Cnt	0 Hours
1758183053	52 Pkt	19 Pkt	18 Pkt	4 Cnt	0 Hours
1758182016	65 Pkt	11 Pkt	10 Pkt	24 Cnt	1 Hours
1758181416	35 Pkt	2 Pkt	1 Pkt	20 Cnt	0 Hours
1758180816	35 Pkt	2 Pkt	1 Pkt	16 Cnt	0 Hours
1758180216	19 Pkt	1 Pkt	0 Pkt	12 Cnt	0 Hours

*Used Equation Coefficients:

Rx10min: 0, 1, 0

Tx10min: 0, 1, 0

Digi10min: 0, 1, 0

srvrTimeout: 0, 1, 0

Uptime: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)