APRS Track Direct

My position About ☰

reset

IU4BUQ Telemetry

This is the latest recevied telemetry packets stored in our database for station/object IU4BUQ. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 >>

Time	Vin*	Rx1h*	Dg1h*	Eff1h*	Temp*
1758258532	13.43 Volt	1240 Pkt	260 Pkt	58 Pcnt	25 C
1758258532	13.43 Volt	1240 Pkt	260 Pkt	58 Pcnt	25 C
1758258232	13.43 Volt	1260 Pkt	260 Pkt	58 Pcnt	25 C
1758257943	13.43 Volt	1280 Pkt	260 Pkt	58 Pcnt	25 C
1758257932	13.43 Volt	1280 Pkt	260 Pkt	58 Pcnt	25 C
1758257632	13.43 Volt	1290 Pkt	260 Pkt	59 Pcnt	25 C
1758257340	13.43 Volt	1300 Pkt	270 Pkt	59 Pcnt	25 C
1758257332	13.43 Volt	1300 Pkt	270 Pkt	59 Pcnt	25 C
1758257032	13.43 Volt	1320 Pkt	280 Pkt	60 Pcnt	25 C
1758256733	13.35 Volt	1340 Pkt	280 Pkt	60 Pcnt	25 C
1758256732	13.35 Volt	1340 Pkt	280 Pkt	60 Pcnt	25 C
1758256432	13.43 Volt	1350 Pkt	290 Pkt	60 Pcnt	25 C
1758256133	13.43 Volt	1390 Pkt	290 Pkt	62 Pcnt	25 C
1758256132	13.43 Volt	1390 Pkt	290 Pkt	62 Pcnt	25 C
1758255832	13.43 Volt	1380 Pkt	290 Pkt	62 Pcnt	25 C
1758255544	13.43 Volt	1400 Pkt	290 Pkt	62 Pcnt	25 C
1758255532	13.43 Volt	1400 Pkt	290 Pkt	62 Pcnt	25 C
1758255232	13.43 Volt	1400 Pkt	290 Pkt	62 Pcnt	25 C
1758254932	13.43 Volt	1400 Pkt	300 Pkt	62 Pcnt	25 C
1758254932	13.43 Volt	1400 Pkt	300 Pkt	62 Pcnt	25 C
1758254632	13.43 Volt	1400 Pkt	300 Pkt	63 Pcnt	25 C
1758254336	13.43 Volt	1400 Pkt	300 Pkt	63 Pcnt	25 C
1758254332	13.43 Volt	1400 Pkt	300 Pkt	63 Pcnt	25 C
1758254032	13.43 Volt	1430 Pkt	300 Pkt	63 Pcnt	25 C
1758253737	13.43 Volt	1420 Pkt	310 Pkt	63 Pcnt	25 C

*Used Equation Coefficients:

Vin: 0, 0.075, 0

Rx1h: 0, 10, 0

Dg1h: 0, 10, 0

Eff1h: 0, 1, 0

Temp: 0, 0.5, -64

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)